Update on my 2014 FG4

[squiggy]

I don't get it. Almost everything is out of spec and that toe is going to eat your tires.

 

[Michal006]

I don't get it. Almost everything is out of spec and that toe is going to eat your tires.

He was hungry.

 

[Michal006]

Joking aside anyone know what is the factory alignment spec? I need to get it done on my car.

 

[derekfriedrice]

Alignment Specs for 2014 Si and Non-Si Civics
Straight from Honda.

Caster
USA and Canada Models:
Caster angle:
Non-Si: 5 degrees 19' +/- 30'
Si (Non 18" wheel): 5 degrees 22' +/- 30'
Si (18" wheels): 5 degrees 15' +/- 30'

Camber
USA and Canada Models:
Camber angle:
Non-Si:
Front: 0 degrees 00' +/- 30'
Rear: -0 degrees 45' +/- 45'
Si (Non 18" wheel):
Front: -0 degrees 04' +/- 30'
Rear: -0 degrees 52' +/-45'
Si (18" wheel):
Front: -0 degrees 18' +/-45
Rear: -0 degrees 45' +/-45'
(Maximum difference between front right and left side: 0 degrees 45')

Toe-in:
Rear Toe-in: 2mm +2/-1mm (0.08 +0.08/-0.04 inches)
Front Toe-in: 0 +/-2mm (0 +/- 0.08 in)

(I take no responsibility for these, I just copied them straight from the alignment spec sheet from Momma Honda. This is the first alignment information I've seen regarding 2014 models)

 

[cpj762x51]

This is good stuff.

 

[cpj762x51]

I just noticed also that they got you down for a 2012. If it even makes a difference...

 

[Michal006]

I just noticed also that they got you down for a 2012. If it even makes a difference...

It probably does. 2014-2015 Si has 18 inch wheels and the suspension is not the same as on the 2013 and older Si's.

 

[cpj762x51]

Yea. I knew that!

 

[Rickyfb6]

Yeah that's what I saw but he didn't align me so when I come back with the camber kit installed I'll let him know

 

[Kevv_Si]

Here's mine. Don't know how much worst mine is but This is also after I installed my skunk 2 springs.

 

[Rickyfb6]

I'm on coils now