Jaysons 2013 CBP Si Sedan build

Jayson Guidry

Jayson Guidry

Well-Known Member
31
35
Coppell, TX
Vehicle Model
Civic
Body Style
Si Sedan
Just ordered these bad boys. Gonna install mid June-ish.
-Eibach Pro-Kit
-TruHart Sport Shocks set of 4
-Progress 22mm rear sway bar
-Skunk2 Camber kit
-Energy Suspension Greaseable Sway Bar Bushings - 22mm
$_12.JPG $_57.JPG $_57.JPG 95158g_lg.png truhart-sport-shocks_LRG.jpg
 
Last edited:
Jayson Guidry

Jayson Guidry

Well-Known Member
31
35
Coppell, TX
Vehicle Model
Civic
Body Style
Si Sedan
Im a fan of plastidip; never used it before, but it went well. Im not a huge fan of the matte texture, but less distracting than the 'chrome' molding. I wonder if theres somthing thast would give it a more glossy finish - just for kicks. Couple of coats and it was good to go. Waited too long the first time to remove the tape and it dried on top of the tape, so when i peeled it off... :pat: Its been on since October, no wear yet...Makes me wanna do the front.

IMG_0983.jpg
 
  • Like
Reactions: Nix
323

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
PlastiDip Glossifier
 
Nix

Nix

Jötunn Moderator
10,765
8,162
Lew-vul, KY
Body Style
It's A Fast Pig!
Nice update on the car... get a 90degree zerk fitting for the bushing that is going on the drivers side. The gas tank blocks the bushing just enough that you can't get a grease gun on there.
 
Jayson Guidry

Jayson Guidry

Well-Known Member
31
35
Coppell, TX
Vehicle Model
Civic
Body Style
Si Sedan
hawk02 said:
Where did you get the bumper scuff plate?? Link?? Do you know if it would fit a coupe?? Thanks and car looks great.......
Click to expand...
Thanks bud! Chipping away at it. Still only has about 9k miles on it, so I wont be messing with any engine or exhaust mods until maybe 30k or 50k miles.

This is the one I got. It says all trims so I would assume it fits 12 and 13 coupes too. Its got a few strips of 3M on the back, but like with every other 3M applied element its always safe to add some more.

http://www.ebay.com/itm/2012-2013-STAINLESS-HONDA-CIVIC-REAR-BUMPER-PROTECTOR-TRIM-SILL-COVER-PLATE-NEW-/181203216517?rmvSB=true&ssPageName=STRK:MEBIDX:IT&_trksid=p2047675.l2557&nma=true&si=pYTcWqoxU%2FmV1vzBE7MzJC%2FY68Y%3D&orig_cvip=true&rt=nc
 
Jayson Guidry

Jayson Guidry

Well-Known Member
31
35
Coppell, TX
Vehicle Model
Civic
Body Style
Si Sedan
xXFlash21Xx said:
Looks good! did the same thing on mine. Those bottom chrome pieces were a pain to get out to do.
Click to expand...

I dont know if Im gonna do those. Havent made up my mind yet, but for now they're staying. Thought it might be cool to some progessively spaced lines. // / / / / / .....idk
I've just been blocking the spray with tarps and tape.
 
xXFlash21Xx

xXFlash21Xx

Well-Known Member
359
317
Myrtle Beach, SC
Vehicle Model
Civic
Body Style
Sedan
Jayson Guidry said:
I dont know if Im gonna do those. Havent made up my mind yet, but for now they're staying. Thought it might be cool to some progessively spaced lines. // / / / / / .....idk
I've just been blocking the spray with tarps and tape.
Click to expand...

Yeah I thought about that but had time to kill when it was raining so just took it off. But each silver piece is held on with a screw and 6 clips each.
 
DiogoDC

DiogoDC

Well-Known Member
339
179
woodbridge
Vehicle Model
si
Body Style
sedan
vinyl wrap it.
thats what i did but then i took it off and i regret it more than anything now lol i wish i still had the gloss black on
 
DiogoDC

DiogoDC

Well-Known Member
339
179
woodbridge
Vehicle Model
si
Body Style
sedan
also check out my youtube channel. i have a video on how to take all the chrome off. bottom one is easy though just take off fog bezel and wrap it on the car.
 
Jayson Guidry

Jayson Guidry

Well-Known Member
31
35
Coppell, TX
Vehicle Model
Civic
Body Style
Si Sedan
With stock rims and tires, does anyone think I'd need lower profile tires w this setup? Any rubbing?
-Eibach Pro-Kit
-TruHart Sport Shocks set of 4
-Progress 22mm rear sway bar
-Skunk2 Camber kit
-4x 16mm front end camber bolts
-Energy Suspension Greaseable Sway Bar Bushings - 22mm
 
You must log in or register to reply here.
Top