Ct-e shift adapter

Wero15

Wero15

Member
3
0
Any comments on this adapter? Does it works fine ? Do you need to change the bushings also as the other ss??
 
Wumbo

Wumbo

Well-Known Member
46
14
if you dont want to shave down your oem shifter, get the buddy club short shifter. it's plug and play
 
Wumbo

Wumbo

Well-Known Member
46
14
If for whatever reason you don't like the buddy club short shifter either, the other choices you have is the bps or twm short shifter. I also heard that ktuned might release a shifter for us, but take that with a grain of salt
 
Wero15

Wero15

Member
3
0
I just been seeing comments that you need to upgrade your bushings cuz they have a lot of problems w/ braking cables , and the best ones out there are the hybrid racing
 
Wumbo

Wumbo

Well-Known Member
46
14
You are probably referring to the shifter cable bushings. The main reasons why people have broken cables is that they replace the oem shifter cable bushing with all metal ones. This leads to less play with the cable and eventually leads to it breaking prematurely. Hybrid racing are considered the best because they have rubber material(or something flexibleish) that allows play like the oem.
 
Wumbo

Wumbo

Well-Known Member
46
14
Nope. But if you want your shifter to have less play, you can upgrade your shifter base bushings which are different from shifter cable bushings.
 
arcder

arcder

Active Member
26
8
Wumbo said:
if you dont want to shave down your oem shifter, get the buddy club short shifter. it's plug and play
Click to expand...


I don't know what they meant by shave down the plastic on your shifter, i have a '13 4 door si all i had to do was take off the little plastic thing that holds the bottom of the shorft throw adapter to the shift linkage cable and used the loctite they provided with the kit for the screws. i've had it for about 10k so far and its never came off or did anything sketchy. Matched with the hybrid shifter cable bushings, and base bushings it feels really good.
 
squiggy

squiggy

Cartographer
Super Mod
11,183
6,654
Michiana
Vehicle Model
'12 Civic Si
Body Style
DBP II Coupe
arcder said:
I don't know what they meant by shave down the plastic on your shifter, i have a '13 4 door si all i had to do was take off the little plastic thing that holds the bottom of the shorft throw adapter to the shift linkage cable and used the loctite they provided with the kit for the screws. i've had it for about 10k so far and its never came off or did anything sketchy. Matched with the hybrid shifter cable bushings, and base bushings it feels really good.
Click to expand...

http://9thcivic.com/forum/threads/2...hift-adapter-and-corsport-base-bushings.5828/

Cut the following piece off.

 
You must log in or register to reply here.
Top