DIY 2012 Civic Si - How to install CT Engineering Short Shift adapter and CorSport Base Bushings

323

323

Modifier
Well if you want, you can include for the sedan, you have to remove a big piece of tubing that I'm guessing runs heat to the backseat
 
trustdestruction

trustdestruction

Well-Known Member
squiggy said:
Honestly, I am not sure. I took a close look at the picture and the MTEC pivot ball when you posted this in the other thread and could not come to any sort of conclusion as to whether or not that would be a replacement piece. Comparing it to the other pictures you posted of a similar shifter mechanism, it does appear that is where it would go, though. I will probably be taking the center console apart to run a wire soon. I can take a closer look then.
Click to expand...
Let me know when you run that wire. I may just buy the pivot ball and see if it fits since I have to install the base bushings anyway and the pivot ball is only $13.
 
trustdestruction

trustdestruction

Well-Known Member
squiggy said:
Ahhh...If someone could provide a picture that I could add in, that would be great!
Click to expand...
When I go in there to do base bushings i'll try to remember to take a picture. Not sure what he's talking about though since I haven't opened it up before, but I have an idea of what it is.
 
Last edited:
trustdestruction

trustdestruction

Well-Known Member
323 said:
You'll recognize it, it's a big square tube of plastic to the left of the shifter. It pops in and out easily too
Click to expand...
Alright, thanks. Sounds similar to what my del Sol had for the vents on the side of the console. I ordered the MTEC pivot ball so when everything gets here (base bushings from Hybrid Racing) i'll be taking it apart.
 
Last edited:
323

323

Modifier
trustdestruction said:
Alright, thanks. Sounds similar to what my del Sol had for the vents on the side of the console. I ordered the MTEC pivot ball so when everything gets here (base bushings from Hybrid Racing) i'll be taking it apart.
Click to expand...

post pics of the hybrid racing base bushings, i want to see how different they are from the corsport ones
 
trustdestruction

trustdestruction

Well-Known Member
323 said:
post pics of the hybrid racing base bushings, i want to see how different they are from the corsport ones
Click to expand...
The sideways positioned bushings is solid I believe, but the larger, horizontally positioned bushing has a spherical bearing to allow for pivoting movement without play. More expensive, but I see the mechanical benefits of having the spherical bearing on a part that is meant to swivel. The OEM rubber bushings are just a cheap way to achieve this movement but sacrifice rigidity and allow the bushing to flex horizontally.

http://www.hybrid-racing.com/products/hr-shifter-bushings/
 
Last edited:
trustdestruction

trustdestruction

Well-Known Member
As promised, here are pics of the air duct on the sedan. It's very easy to remove, you just grab the lower end of the duct and lift up as if the upper end is a hinge, and then pull out the upper end in the downward direction.

This step just basically has to be done before you can access the two base bushing bolts towards the front of the car.

IMG_1396.jpg IMG_1397.jpg IMG_1398.jpg
 
Last edited:
R

retracnaes

Well-Known Member
Being fairly intelligent helps ;) When the car is in any gear, don't have any excess play in the shifter. I actually checked it after seeing this thread just out of curiosity. My initial question of the benefit of the bushings wasn't because I doubted they provided any improvement, but rather what was improved. Based on your response, I checked for play at the end of each shift and found none. I don't need to install a product to feel the difference if I know what the difference is supposed to be, although I'm sure the companies selling them would appreciate it.
 
squiggy

squiggy

Cartographer
Super Mod
The play isn't in the shift lever itself. It is in the movement of the whole base unit, which there is some due to the stock bushings being a fairly soft rubber. I have yet to read about someone saying that they haven't noticed a difference after the install. It really does make it feel more solid.

But hey, your car and your money.
 
R

retracnaes

Well-Known Member
I assumed that, based on the location that the parts install...i understand the concept and why it would be beneficial in general, but since I don't have any play to begin with, that led me to ask the question. Maybe I got the Wednesday built car and got lucky, who knows, that's why I initially asked.
 
You must log in or register to reply here.
Top