What Do You Guys Think?

[Imhotep]

I'm wondering if these wheels would fit properly on my 2012 Civic Si Coupe without stancing or tucking.

I love this wheel style and I like the prices I have found them for. Check out the wheels, specs, and my actual car and let me know what you educated guys and gals think.

 

[cb7atheart]

Im no expert...but i think our car have a 64.1 center bore!?...im sure someone else will correct me if im wrong...

 

[webby]

hubcentric rings

View: https://www.youtube.com/watch?v=D3dl3XTl3FY

 

[Dutchmaster]

These look great. You should also look into the XXR 521's and ESM 002R. Very similar in design and you may (or may not) find others for a little cheaper.
For the ESM's, Beangarage.com sells them.
Also, do you have any plans for suspension?

 

[Nix]

Yeah, nice wheels. Just make sure and pick up a correct set of tuner lugs and hub centric rings. You should be all set.

 

[Imhotep]

These look great. You should also look into the XXR 521's and ESM 002R. Very similar in design and you may (or may not) find others for a little cheaper.
For the ESM's, Beangarage.com sells them.
Also, do you have any plans for suspension?

As for the suspension, not just yet. I would still like to get in my driveway so I probably wouldn't go too low but I might drop it a little bit. I have seen those wheels also and I like those as well.

 

[raf]

i have JNC's too cheap quality

 

[Dutchmaster]

As for the suspension, not just yet. I would still like to get in my driveway so I probably wouldn't go too low but I might drop it a little bit. I have seen those wheels also and I like those as well.

I see. Check out my build thread, I have H&R springs and I drive around NYC with no issues. I do have problem with taking EXTREMELY steep driveways, but honestly, Its those driveways you look at when your at stock height and your just like "NOPE!"

I still take speed bumps head on without angling and there is absolutely no scrape. Its stiff too so it doesnt compress to the point where you scrape after taking a speed bump at like 20-25mph.

I looked at these wheels before settling on my Grids though. Almost got them. Next year, I might go with the XXR 521 with gold rivets and gold lugs.
Man, I wish I could stop spending so much on this car lol.

 

[Imhotep]

I see. Check out my build thread, I have H&R springs and I drive around NYC with no issues. I do have problem with taking EXTREMELY steep driveways, but honestly, Its those driveways you look at when your at stock height and your just like "NOPE!"

I still take speed bumps head on without angling and there is absolutely no scrape. Its stiff too so it doesnt compress to the point where you scrape after taking a speed bump at like 20-25mph.

I looked at these wheels before settling on my Grids though. Almost got them. Next year, I might go with the XXR 521 with gold rivets and gold lugs.
Man, I wish I could stop spending so much on this car lol.

I'm thinking about ESM wheels also because they are local to SoCal. But the lowering springs are good to know.