Turbo+ AWD!!!!!

NateyP1

Well-Known Member
who else loves SC biker chicks ? :) Natey, where are you


Id hit it......then I'd hit it again and again and again!
 

07TLX

Well-Known Member
She has no uni-brow, but I dunno about a snaggle tooth, but even if she does they have paper bags...lol
 

k757

Well-Known Member
looks like there will be a NASIOC Top of the Trop (AC, NJ) meet on Oct 8. From what I read, still in discussion but is sounding like a go.
 

death_roll

Well-Known Member
I'll probably need a solid month to recover from the dragon

on another note, there's one less s2k on the road :sad:, one was wrecked yesterday not far from my house, pisses me off because I really want one and there's less and less and douchebags that wreck them all the time.
 

k757

Well-Known Member
I'll probably need a solid month to recover from the dragon

on another note, there's one less s2k on the road :sad:, one was wrecked yesterday not far from my house, pisses me off because I really want one and there's less and less and douchebags that wreck them all the time.
a month?

 

Damaca

Minister of the Boost
Vip Member
I plan on being as cheap as possible because I still don't know whats up with my orders. :(
 

Chevarian113

Well-Known Member
Morning all! It's claims hell here...

On another note, I may just get rid of my sway as well. The noises the links make are driving me crazy. I've tightened everything down, but the little holders rattle a lot and there are some strange squeeks.
 

death_roll

Well-Known Member
Morning all! It's claims hell here...

On another note, I may just get rid of my sway as well. The noises the links make are driving me crazy. I've tightened everything down, but the little holders rattle a lot and there are some strange squeeks.

it's probably not centered properly, the 2011 sti bar is a good upgrade and fits like stock
 

Chevarian113

Well-Known Member
I moved the stops like you said, but the rattles aren't coming from that. It's the endlink supports. The gold metal pieces that bolt into to hold the bottom of the endlinks in place. They hold still for the most part, but are just loose enough on the bolt to rattle and squeek. My concern with the stops is they are easily movable, so I don't know that the bar can stay centered. It's starting to be more annoyance than it's worth, considering how often I'll get use from them.
 

death_roll

Well-Known Member
I moved the stops like you said, but the rattles aren't coming from that. It's the endlink supports. The gold metal pieces that bolt into to hold the bottom of the endlinks in place. They hold still for the most part, but are just loose enough on the bolt to rattle and squeek. My concern with the stops is they are easily movable, so I don't know that the bar can stay centered. It's starting to be more annoyance than it's worth, considering how often I'll get use from them.

they shouldnt move at all, tighten them as tight as you can.
 
Top