Skunk2 Ultra Series Intake Manifold

[mySIck]

Dose anyone know if the Skunk2 Ultra Series Intake Manifold fit's the 9th Gen SI. Or do you have to buy the plate adapter? Part #:
307-05-9200 says it fits 2012+ SI

 

[Michal006]

Good question.

@webby @VitViper

 

[Michal006]

From Skunk 2 website Scroll down to comments
"Larry- It is currently in the works. It is basically the same manifold as the 8th gen however, with the 9th gens you would be required to use EV14 injectors which also requires Flashpro."

http://cms.skunk2.com/id/832/Coming-Soon-New-2012-Civic-Si-Products/

 

[mySIck]

Hummm if all I need is Injectors then that would be perfect. Because I was planning on getting them anyway.

 

[webby]

I would contact skunk2. That part number doesn't even show up for me on their website...unless I'm blind.

 

[Michal006]

It's probably this one.

http://store.skunk2.com/pro-series-intake-manifold-5400.html

 

[Michal006]

It fits 8th Si so he will only need EC14 injectors.

 

[webby]

he was asking about the ultra series. ^ pro series above

 

[Michal006]

It matches the part number that he posted before

http://www.rpmware.com/catalog/item/1808333

 

[mySIck]

I found it on this website. http://store.psiproformance.com/skunk2/skunk2_ultra_series_intake_manifold/g-69043.aspx.

 

[webby]

I found the part number on other sites as well,... just didn't know why they wouldn't have it on their own site. That's why I said you should contact skunk2

 

[mySIck]

Yeah I could not find it either, I am going to call them in the morning. To see if it works with the 9th Gen. And if so what is needed for the upgrade.

 

[mySIck]

I spoke with Skunk2 today about it. And they said there is not a Intake manifold for the 9th Gen but the 8th Gen's work all you need is the Fuel Rail and injectors. From the 8th Gen.

 

[webby]

Did they give you a part #?

 

[Michal006]

Also would like to see numbers compared to stock manifold.

 

[mySIck]

Oops I forgot to ask him for a part number. But he told me the Skunk2 intake manifold's for the 8th Gen work with the 9th AS LONG as you get the 8th Gen Fuel rail and injectors. So you can use the Skunk2 Pro Series Intake Manifold or the stock manifold from the 8th Gen.

 

[mySIck]

And i asked about the adapter they sale for the RBC intake manifold kit and he told me that you don't need a adaptor.

 

[mySIck]

http://www.procivic.com/pages-product_car_part_info/category-70_139/product-314/index.html

http://www.procivic.com/pages-product_car_part_info/category-70_93/product-1069/index.html

http://www.procivic.com/pages-product_car_part_info/category-70_93/product-1114/index.html

So I am assuming that you buy all this you should be set.

 

[mySIck]

Also would like to see numbers compared to stock manifold.

And yes the amount of money it would cost to change over I want to see numbers too.

 

[Michal006]

That's $990 for parts to have that manifold installed in 9th Si.