Si wheels on crv??

[Lee Marchand]

I have a set of si wheels from an 07 si that I use on my 2013 si for winter. I was wondering if anybody knew for sure if they would fit on my gf's 2013 crv? Bolt pattern is the same and they both run a high offset. I just can't seem to get a straight answer from anybody. I know these wheels have been used on older crv's, but I haven't seen them on the new one.
Thanks

 

[webby]

From what I see, depending on cr-v trim it came with either 17's or 18's
225/65 R17 :7x17 ET40 5x114.3
225/60 R18 :7x18 ET40 5x114.3

Says it has 11.8" rotors up front and 12" rotors in the back?

si says 11.8 rotor size.
17x7+45 for the 2007 si wheel offset

So you'll have 5mm less clearance

Big thing would be if the si offset clears the rotors & doesn't interfere with the crv suspension components. 5mm isn't a huge deal, but I don't know how much room there is on the crv & wheel designs play a part of that as well. Why not unbolt one wheel and try? - (try the back first since it says 12" rotor)

 

[Lee Marchand]

Ok thanks, I figured that is what I was gonna have to do, just wanted to see if anyone on here tried it yet. It would have saved me from trying this in the snow!

 

[Nix]

You'll need a much taller tire than the stock Si ones or the speedo/mileage will be way off. Other than that I think they should fit without issue.

 

[Lee Marchand]

Yeah I know, I am just gonna put her stock tires on the rims and put them on. The crv stock rims are just so ugly and the silver on white looks horrible.