si spoiler

[webby]

I've not seen the 2013 si coupe in person, but the photos posted to honda's site are identical to the 2012 photos they released.

2013 exterior pics from honda-
http://automobiles.honda.com/civic-si-coupe/exterior-photos.aspx

2012 exterior pics from honda-
http://9thcivic.com/gallery/2012-Civic-SI-Coupe

?

 

[Flippercon]

Huh maybe I saw the sedan spoiler. It was a 2013 si on here recently. Maybe it was a sedan.......

 

[FB2Chris]

The exterior of the 2013 coupe has not changed from that of the 2012, which is why the 2013 coupes were made available far before the 2013 sedans.

 

[FB2Chris]

Sedan spoiler:

 

[Flippercon]

Sedan spoiler:

Yep thats it.

 

[DonDeeBoogie]

I've seen it done without having to swap the trunk lids. Note: All pictures and quotes have been taken from the other 9th gen forum.

Before :


After:




Si Spoiler on an EX-L trunk lid:

How much would that cost to do?
I been looking to do that for quite a while now.I need this!!!

 

[FB2Chris]

How much would that cost to do?
I been looking to do that for quite a while now.I need this!!!

Depends where you buy the garnish and if you're capable of doing it yourself. Majestic Honda lists it for a little over $300: http://www.hondaautomotiveparts.com...gry3=2DR+SI&catcgry4=KA6MT&catcgry5=TRUNK+LID

 

[bobshur]

The si trunk has two bumps on the top sides on the back, it would stick out like a site thumb.

 

[webby]

you'd also have to deal with the holes in the trunk lid if you just removed that spoiler.

 

[DonDeeBoogie]

Depends where you buy the garnish and if you're capable of doing it yourself. Majestic Honda lists it for a little over $300: http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=2012&catcgry3=2DR SI&catcgry4=KA6MT&catcgry5=TRUNK LID

Thats interesting... I wonder how difficult it is. seems simple.
I just googled some prices and they have the cheapest.

 

[FB2Chris]

Thats interesting... I wonder how difficult it is. seems simple.
I just googled some prices and they have the cheapest.

Shouldn't be too hard. Basically all you have to do is remove your current garnish and install the Si garnish. There's some info on the first page of this thread regarding two bolts and the wire harness.

 

[nat3d]

The si trunk has two bumps on the top sides on the back, it would stick out like a site thumb.

two bumps?

 

[bobshur]

Top of the back of the lid look at it from the back , it's not smooth like the lx/ ex, it will look like azz.

 

[bobshur]

It squares out.

 

[FB2Chris]

Top of the back of the lid look at it from the back , it's not smooth like the lx/ ex, it will look like azz.

That's the garnish. The whole thing comes off.

 

[nat3d]

yeah if you look youl see the seam on the top

 

[bobshur]

No it doesn't come off .

 

[FB2Chris]

No it doesn't come off .

The garnish?

 

[hey_mikey]

No it doesn't come off .

here's the parts diagram of the trunk lid and the 3 different spoilers available (LX w/ no brake lamp, EX w/ brake lamp, and Si). as you can see, the whole section above the license plate is plastic and does indeed separate from the trunklid, making it possible to swap spoilers without swapping trunk lids. in fact, the actual trunk lid (part #7) is the same for all body styles, with the only difference being the spoiler.

 

[FB2Chris]

I just didn't feel like reiterating myself from the previous page.