PWJDM Gurney Flap

[Danny Hsu]

Does anyone think this will fit a trunk on an EX coupe?

I know the trunks on the Si's and EX's are different.

http://passwordjdm.com/PasswordJDM-Dry-Carbon-Fiber-Gurney-Flap-12-13-Civic-Si-2DR-P10738C2884.aspx

 

[webby]

Like directly on the ex truck lid?

 

[Twitch]

This should fit. It is a direct replacement for the top part of the trunk lid. It would replace the area with the emblem and 3rd brake light. You might have to extend your brake light wires as this will protrude further than the ex

 

[Twitch]

The lid is the same for all models, the garnish on the lid changes.

 

[JonnyRotten]

This should fit. It is a direct replacement for the top part of the trunk lid. It would replace the area with the emblem and 3rd brake light. You might have to extend your brake light wires as this will protrude further than the ex

@Twitch this doesn't replace anything. It's just a little extra lip that fastens on top of the existing Si trunk spoiler. The picture on the passwordjdm site is just showing the Si spoiler removed.
I think @Danny Hsu is asking if it will fit a non Si trunk lid.

 

[Twitch]

@Twitch this doesn't replace anything. It's just a little extra lip that fastens on top of the existing Si trunk spoiler. The picture on the passwordjdm site is just showing the Si spoiler removed.
I think @Danny Hsu is asking if it will fit a non Si trunk lid.

Oh gotcha I was confused why it was showing the entire trunk lid but said gurney flap.

 

[Danny Hsu]

Like directly on the ex truck lid?

Yes, both trunks look pretty similar in terms of the shape. I just wanted to see if anyone can confirm that the curvature of both trunks are the same.

 

[webby]

Yes, both trunks look pretty similar in terms of the shape. I just wanted to see if anyone can confirm that the curvature of both trunks are the same.

I'd contact pwjdm and ask how flexible the flap is. If it's not real rigid, it'd probably could be stuck to the EX. It's just held on by 3m tape

 

[Twitch]

I would be concerned with the length. I believe the si lid is longer as the spoiler protrudes more. While you may be able to conform to the curve the flap will actually be too long on the ex. Maybe the vendor can provide some dimensions