Installing Pioneer Appradio 2 into Si with Premium Sound

[jmetcalfe84]

Okay so long story short i'm installing this headunit and I bought the wrong harness, I reordered the premium sound one and it should be here in a few days. I have a few questions about some wires I couldn't figure out where to connect.

1. Light Green wire coming from pioneer harness meant for the e-brake. I opened up the center shifter console and didn't see anywhere to attach into the ebrake. Does this go to one of the factory harness somewhere?

2. Blue/White wires coming from pioneer harness meant for auto-antenna relay control, if the vehicle has a glass antenna, connect to the antenna booster power control terminal?

3. Bought Metra 40-HD10 honda antenna adapter. Plugs into factory harness but also has a blue wire coming off of it I have no idea where to attach?

4. Have ASWC (not ASWC-1) that I want to use to keep my steering wheel controls. From other posts it seems like all I have to do is attach pink & blue wires to 20pin factory harness to get it to work. Do I still have to connect the red or black wires for power & ground?

5. I have a second ASWC and from some other research it seems you can keep bluetooth control by using 2 SWI's, can I do the same since I have a second ASWC sitting around?

Thanks for anyone who helps me with any answers!

 

[webby]

just pointing you towards the wiring diagrams at the beginning of this thread in case it may help you

as well as post #6 here -
http://9thcivic.com/forum/threads/2012-civic-audio-wiring-guide-pinouts-for-factory-radio.5916/

hopefully some of the other audio guys can help you out with the wiring

 

[jmetcalfe84]

just pointing you towards the wiring diagrams at the beginning of this thread in case it may help you

as well as post #6 here -
http://9thcivic.com/forum/threads/2012-civic-audio-wiring-guide-pinouts-for-factory-radio.5916/

hopefully some of the other audio guys can help you out with the wiring

I saw those and they seem helpful but they are still a little confusing esecially if you don't know the lingo that well. I just want to make sure i'm wiring everything where it needs to be so I don't have to open the dash up again and risk breaking those stupid clips.