Ground locations for amp install 2013 si coupe

[xXCiviXx]

I used one of the taillight bolts as a ground until I moved my amp and it worked fine. I also used hi level inputs from stock sub and tapped the + and - right at the sub and connected the L and R hi level to the sub output. I have no problem with noise and it is plenty loud. Did you tune your amp? Adjust the gain and this could help.

 

[Metal85]

http://9thcivic.com/forum/threads/solution-to-amp-ground-towards-rear-of-trunk.12150/

haha You linked my thread of figuring it out, to my Thread of a question lol! Thanks buddy

 

[webby]

haha You linked my thread of figuring it out, to my Thread of a question lol! Thanks buddy

that way others can find it

 

[xXCiviXx]

I ended using the bolt under the seat. You have to remove the small bit of moulding, but then it works great. I actually drilled a perfect size hole in the moulding to prevent the wire from getting crushed.

could you take a pic showing the location where you grounded the amp? I am planning on installing my new amp under the passenger seat

 

[Metal85]

that way others can find it

Oh true haha

 

[Metal85]

Under the carpet here, about 4 inches past the top, a tiny bit more to the left, cant miss it, there are a ton of negatives going to this location