Damn not another 13' TW Fb6.........

shad2fast4u

shad2fast4u

Well-Known Member
My current Spoon duracon knob got a little worn out so I picked up a brand new one from a local shop.
spring 2017-30 by Shadman I, on Flickr

Some minor things have arrived
spring 2017-31 by Shadman I, on Flickr

Dropped off my front lip to get resprayed. I ordered the OEM lip spoiler seal so I can add it on when I get the lip back.
spring 2017-33 by Shadman I, on Flickr

Shoutout to "Civi9" who recommended getting some rockauto centercaps for the rpf1's.

Rockauto centercaps for the RPF1's
spring 2017-34 by Shadman I, on Flickr

spring 2017-35 by Shadman I, on Flickr

spring 2017-36 by Shadman I, on Flickr

spring 2017-37 by Shadman I, on Flickr

Excellent color match out of the box.
spring 2017-38 by Shadman I, on Flickr

I decided to add some "H" stickers for the centercaps
spring 2017-32 by Shadman I, on Flickr

spring 2017-39 by Shadman I, on Flickr

Got some OEM Honda TPMS sensors and hardware for the RPF1's this season so I can disable the silly traction control.
spring 2017-40 by Shadman I, on Flickr

spring 2017-41 by Shadman I, on Flickr

spring 2017-42 by Shadman I, on Flickr

spring 2017-43 by Shadman I, on Flickr

So, I came across a clearance issue with the Rockauto centercaps for the front 2 wheels. The hubs do not allow the caps to snapped into place the 2nd time so that they can sit flush. My offset is a +35...
spring 2017-44 by Shadman I, on Flickr

At this point, I was thinking about 2 possible solutions.
- A) Grind down the front 2 centercaps to have hub clearance.
- B) Run 3mm spacers up front to clear.

I went with Option A. Let's just say grinding the first centercap wasn't successful....
spring 2017-45 by Shadman I, on Flickr

I went right through it with my dremel lol.

I decided to give it another shot to 2 out of 3 caps I had left.

Success! Rays lug nuts are also on!
spring 2017-46 by Shadman I, on Flickr

spring 2017-47 by Shadman I, on Flickr

Ordered another centercap so I'm rolling with 3 out of 4 for the time being. #RACECAR
 
bauer311

bauer311

Well-Known Member
That's quite a few updates. I like the "h" stickers on the center caps. Good to know about the center caps though. I plan on getting some wheels of the same spec.

Sent from my SM-N920V using Tapatalk
 
shad2fast4u

shad2fast4u

Well-Known Member
Team3d harness and some other misc. stuff for the new headlights

OEM_HD_Setup by Shadman I, on Flickr

OEM Honda Projector headlights
OEM_HD_Setup2 by Shadman I, on Flickr

OEM_HD_Setup3 by Shadman I, on Flickr

OEM_HD_Setup4 by Shadman I, on Flickr

OEM_HD_Setup5 by Shadman I, on Flickr

OEM_HD_Setup6 by Shadman I, on Flickr

OEM_HD_Setup7 by Shadman I, on Flickr

OEM_HD_Setup8 by Shadman I, on Flickr

OEM_HD_Setup9 by Shadman I, on Flickr

OEM_HD_Setup10 by Shadman I, on Flickr

Lip is also back from the shop, I added the oem rubber seal as well (Kev, I know you wanted to see a pic of it, here it is!)
The oem rubber seal acts as a protectant between the lip on the front bumper, prevent scratch/scuff marks on the paint for the contact points.

OEM_HD_Setup11 by Shadman I, on Flickr

OEM_HD_Setup12 by Shadman I, on Flickr

These are the Thailand spec so the output is rhd
OEM_HD_Setup13 by Shadman I, on Flickr

I aimed it down and had my brother see if the headlights blind anyone, apparently it doesn't. I also had them on the car for 2 weeks with no flashes from other drivers. I plan on retrofitted on the projectors anyways...

My previous OEM Retrofitted headlights are for sale on the forum if anyone is interested. :)
 
shad2fast4u

shad2fast4u

Well-Known Member
webby said:
wait... you picked those headlights up and you plan to do a retro in them? You had a retro previously too? What is the purpose of that?
Click to expand...
As crazy as it sounds, i like the look of these better because theres no gaps. It also has sequential signals which I like as well (when low beams are on). Plus its more exclusive lol.
 
You must log in or register to reply here.
Top