- Thread starter
- #141
Safe Gabe
Well-Known Member
upgraded pads, or oem?
Upgraded fronts to EBC Yellows, rears are Hawk HPS
upgraded pads, or oem?
Noice! Thats wide as heck on the front!
Just cause everyone is going to ask:
Camber? (-2 R/-1F still?) Offset? (+35?) Rubbing?
255 is some meatGot my new setup on, but haven't had a chance to get any decent pictures. 255F/225R on a 17x9 setup--
![]()
![]()
![]()
So with a 17x9 +35 wheels you can fit a 255/40? with no rubbing and -3 camber?
How do you like the staggered tire setup on the street?
I'm in the process of going 255/40 17x9+38 on the fronts and 225/45 17x8+35 rear. I have a set of advans that have been hanging out in my attic for the past year.
I usually don't mind being the Guinea pig but good to see someone else with a 9th went the same route I'm considering.
Also noticed you have 17x9+35s any issues beside trying to run more negative camber? My +38 is close and I only have a 225/45 currently to test with was wondering if I'll run into any issues when I bump up to the 255/40s
Awesome, thanks for the reply. My previous wheel set up I cut the fender wells and rolled the tabs I figured I'd have to do it here as well. Probably going to need to run a spacer up front it seems then. No biggie might be an excuse to get extended studs.
Now that you've been on the mono-rs for a while how would you rate the daily drivability? I had a set of ksports but have since put the stock suspension back on for now. Trying to get an idea of how the 8kF and 10kR spring rates of the mono-rs will compare to the 7kF and 7.5kR ksports.
Didn't have a transponder this time aroundHow was the day? Results?
I thought that rear window sticker said: Don't stare! Drive!
Looks super fun. How do you think you did? Slay anyone or catch any much "faster" cars with the new setup?