13 fb6 slow build

[r18-power]

absolutely. It will say they don't fit the 2012-2015 civics, but they do. You'd need 2 of them.

Amazon productView: http://www.amazon.com/Dorman-521-872-Control-Arm/dp/B00GJ1OP00/

Thanks for the info we by, I just placed my order!

Thanks. I bought them in town a little parts store owner I know gave them to me for his cost $45/piece.. You can get them on Amazon for $52 free shipping just type the number ( 521-872 )

Thank you! I just paid for mine and I also bought some eibach sportlines..

 

[13civicsi4]

Well finally got to put the rear springs on tonight and hopefully get up early enough to do the fronts in the morning.. The rear looks much better now

 

[13civicsi4]

Got all the springs on ,washed and waxed and put the sticker on

 

[13civicsi4]

Just painted my front si emblem

 

[13civicsi4]

The green looks brighter in this picture for some reason

 

[13civicsi4]

And now the rear emblem is done

 

[13civicsi4]

Took a trip to Nashville And back this weekend then notice this today Now gotta figure out replacements

 

[webby]

Took a trip to Nashville And back this weekend then notice this today Now gotta figure out replacements

Do you happen to own a dremmel tool?

 

[13civicsi4]

Yes I do

 

[webby]

Yes I do

I've done this on two sets of fogs that were destroyed from rocks or whatever. Each time the lexan worked 100% for years without breaking again. You should still be able to get the small sheets at places like lowes or Home Depot. Basically you'll just need the small piece, a dremmel, some tape and rtv clear silicone. It's a very cheap fix that should last. The procedure should basically be the same....just make a template from your own fog

http://www.8thcivic.com/forums/diy-...6-cracked-fog-light-lens-replacement-diy.html

 

[13civicsi4]

I've done this on two sets of fogs that were destroyed from rocks or whatever. Each time the lexan worked 100% for years without breaking again. You should still be able to get the small sheets at places like lowes or Home Depot. Basically you'll just need the small piece, a dremmel, some tape and rtv clear silicone. It's a very cheap fix that should last. The procedure should basically be the same....just make a template from your own fog

http://www.8thcivic.com/forums/diy-...6-cracked-fog-light-lens-replacement-diy.html

Hmm wouldn't have thought about that I might at least attempt it if that sheet is that cheap. I can get a new set for $53 but if I can go that route I'll already have lenses off to put halos in them. I'm gonna look into it thanks.. That link wouldn't load the pictures tho But I get the idea

 

[webby]

Hmm wouldn't have thought about that I might at least attempt it if that sheet is that cheap. I can get a new set for $53 but if I can go that route I'll already have lenses off to put halos in them. I'm gonna look into it thanks.. That link wouldn't load the pictures tho But I get the idea

I think when I bought the sheets they were around $12 if I remember correctly. Were you in tapatalk trying to see the pics or a normal browser? I just got the photos to load.

 

[13civicsi4]

I think when I bought the sheets they were around $12 if I remember correctly. Were you in tapatalk trying to see the pics or a normal browser? I just got the photos to load.

The regular browser on my phone tho so that may be why they normally load on it though

 

[13civicsi4]

Well just went back to that link and they loaded. Strange but yea that looks like it turned out good. I'm gonna have to give it try..

 

[webby]

I ended up taking a hammer and breaking the glass out of my "good" fog to do them both at the same time. I hated to do it, but I figured I might as well do them at the same time while I had everything removed from the car.

 

[13civicsi4]

I ended up taking a hammer and breaking the glass out of my "good" fog to do them both at the same time. I hated to do it, but I figured I might as well do them at the same time while I had everything removed from the car.

Im gonna do the same mine as well do both at the same time.. I'm gonna try to go look for that stuff today then gotta wait and pick out the rings I'm gonna put in them.. I'll surely post it when I'm finished.

 

[13civicsi4]

So went and took my busted fog light out and find more damage

 

[webby]

that a hole in the bumper area next to the fog itself?

 

[13civicsi4]

Yes it is

 

[13civicsi4]

Just ordered corsport base bushings and acuity cable bushings. Hope I picked the right base bushings I only seen one option till after I ordered