Search results

The force is strong at my work....

A mini H1 retro can be done in less than a day.

Skip your morning latte and give to the kidz!!!!! :giggle:

So that's about $500 USD......that's a good deal. Normally it is $700 and up from what I have been seeing. The hardest part about doing a retro with Mini H1s is baking the headlights open.

Are you shipping? Do you happen to know the weight? Have centercaps? Any pics on the car?

Donated! BTW...all the donation Toys for Tots buttons say "$x.xx for 9 months".

Like this..... That washer will move around a little when setting the camber. Also will move around and seem "loose" until you tighten it a bit.

Prob being installed wrong. That square washer is not needed. The tab you are pointing to is supposed to go in between the head of the bolt and the lobe in the bolt. Right in the space that the lobe creates when bolt is in the strut. Basically, get rid of the square washer and move the round...

Easy enough to set the camber. Just jam it all the way in to get the -1.5.

Not horrible but might be better if they were wider at the front of the hood.

While walking the dog in mah hood...

About 25-30 people in the office....

1-I want to use Iris shroud instead, will that fit my civic with no problems or should I stick with the standard? You can use them but you might need to do some trimming to fit them. 2-if I put the headlights back on and notice the cut off line angles up on the outer parts, or angle down, will...

Sorry about not replying.....but yes, to anyone out there looking for a deal on rear camber arms. Buy the Dorman ones that are actually SPC camber arms. They are the alumn ones and they are for the 8thgen Civics but do fit the 9thgen Civics. On Amazon they are sold individually so you need a...

Per Honda you should replace the bolts but I haven't had any issues re-using the bolts.

Well that blows....

This!!! SPC bolts are like $20-$30. Go buy some....Nao!

At work.....we pay for 10 up and 10 down.....

My statement still stands..... :giggle:

Just add camber.....win win.....