BMW M3 Track Car
- Thread starter jrotax101
- Start date
sonej4
Well-Known Member
GL and hope to be out there sometime next year. I just don't have the stamina this year.
new front springs to test out at Roebling. Trying to fix my floaty rear..
900lb/in
Robert's car is the one that looks like the flying car out of Harry Potter, in case you hadn't noticed
Lol yeah... our friend's has a black roll cage
well yeah...lol that too
So Chris' car (the one on the right) caught the breaksies from being too close to mine and the ABS stopped working. I fixed it by connecting a double insulated wire back together (solder/shielded them).
Swapped his diff fluid out, threw the track pads in and it works like a charm now.
Oh and also swapped a clutch/flywheel in an e46 330ci this weekend. Nomar06 that job sucked ***... LOL
My car: swapped the front springs out, replaced some hardware, completed wiring up my Innovate water temp gauge so it actually works now.. (lol), got my hoosiers mounted on my BBS wheels (love being able to have a friend mount/balance everything for free99), borrowed two wheels from Chris and put my 245 Michelin PS2's on, and then using the OEM rears up front to get down to Roebling next weekend.
Also another good friend drew up my cardboard template onto a CAD program and sent the design out to a machine shop he knows to cut out and bend some radiator ducting for me.
Swapped his diff fluid out, threw the track pads in and it works like a charm now.
Oh and also swapped a clutch/flywheel in an e46 330ci this weekend. Nomar06 that job sucked ***... LOL
My car: swapped the front springs out, replaced some hardware, completed wiring up my Innovate water temp gauge so it actually works now.. (lol), got my hoosiers mounted on my BBS wheels (love being able to have a friend mount/balance everything for free99), borrowed two wheels from Chris and put my 245 Michelin PS2's on, and then using the OEM rears up front to get down to Roebling next weekend.
Also another good friend drew up my cardboard template onto a CAD program and sent the design out to a machine shop he knows to cut out and bend some radiator ducting for me.