323's Build

ethlar

ethlar

Grumpy Moderator
Super Mod
I got the individual cylinder, general, and random misfire lights when a upstream O2 sensor started going but wasnt out of spec itself enough to set the light

got any of the snapshot data on when the errors got set?
 
323

323

Modifier
ethlar said:
I got the individual cylinder, general, and random misfire lights when a upstream O2 sensor started going but wasnt out of spec itself enough to set the light

got any of the snapshot data on when the errors got set?
Click to expand...
Nothing specific no, but I was just driving home in traffic, nothing crazy.

I should've included this in the first post, but I first noticed the misfires a few weeks ago, but they were subtle are far in between. Only the past 2-3 has it been getting worse, so maybe it could be a sensor going out.
 
323

323

Modifier
Now having some electrical issues. I think the wiring for my lights is getting loose because the car tells me to check DRL system, but the bulbs are still on so I'm guessing one of my resistors came loose. And one headlight keeps going on and off. So I'm planning on taking off the bumper and headlight housings tonight and checking all the wires, it'll be fun!
 
323

323

Modifier
Found a resistor wire snapped causing the DRL issue.

The grounds for the relays were getting very rusted, so I'm guessing that is causing the low beam issues. Will be putting it all back together Friday to find out for sure.

Also rerouted my injector grounds to the valve cover bolts so hopefully I won't have an issue that those anymore either.
 
Nix

Nix

Jötunn Moderator
Dielectric grease. Get some if you live in a salty winter place.
 
323

323

Modifier
I've been driving through some rough construction back and forth to work everyday for about 2 weeks now along with some construction on highways around Chicago, and last night my rear suspension collapsed. So I just placed an order for Tein Street Advance coilovers, and they should be here soon!
 
323

323

Modifier
Also bought new spark plugs since I realized I haven't replaced mine in about 3 years and I'm having some idle stumbling issues that I think are being caused my the plugs. Does anyone know what I should gap them to? I was planning to just measure the gap on the current plugs installed by my tuner and use that but not sure if I should change it at all, not sure what the current gap is yet.
 
bootyluvr

bootyluvr

Well-Known Member
323 said:
I've been driving through some rough construction back and forth to work everyday for about 2 weeks now along with some construction on highways around Chicago, and last night my rear suspension collapsed. So I just placed an order for Tein Street Advance coilovers, and they should be here soon!
Click to expand...

Damn! That sucks :(
 
323

323

Modifier
stilletto said:
Why Tein? Probably better options out there.


Sent from my iPhone using Tapatalk Pro
Click to expand...
Just read a bunch of reviews from the people on here and they seemed to be liked for daily driving. I know the redshift ones are the best but they're also more than double the price and I'm not looking to spend that much right now.
 
You must log in or register to reply here.
Top