Louder Exhaust?

[Poloshirtman]

Hey I have a 2012 Civic LX Sedan that I was going to put a loud exhaust on it. I dont want it to be screaming but I want it to be loud enough that it gets attention and will scream if i floor it on a highway. I've been looking at the Invidia N1 System vs. the Invidia Q3000 vs. the Skunk2 Megapower RR. Not sure which to get, any tips or comments would be appreciated!

 

[webby]

the tsudo is about the few full exhausts that was made for the r18 motor (non-si).
http://www.erzperformance.com/Tsudo-Honda-Civic-SI-2012-2013-Sedan-Catback-Exhau-p/20-9379.htm

 

[Poloshirtman]

the tsudo is about the few full exhausts that was made for the r18 motor (non-si).
http://www.erzperformance.com/Tsudo-Honda-Civic-SI-2012-2013-Sedan-Catback-Exhau-p/20-9379.htm

Is it a loud exhaust system? I don't want to have an exhaust that isn't loud.

 

[Poloshirtman]

the tsudo is about the few full exhausts that was made for the r18 motor (non-si).
http://www.erzperformance.com/Tsudo-Honda-Civic-SI-2012-2013-Sedan-Catback-Exhau-p/20-9379.htm

Also the link you sent says it won't fit the lx civic

 

[webby]

http://www.erzperformance.com/mobile/Product.aspx?ProductCode=20-9376

Prob the loudest exhaust out there. People in the si were setting off car alarms with it.

 

[Nix]

Yeah, there is not much made for the non-Si cars. Your best bet, and actually fairly inexpensive option, is to find a local exhaust/muffler shop and have them fabricate a custom system for you. Vibrant make a lot of nice exhaust components so you could pick out a resonator and a muffler and let the shop do the rest of the welding and fitment. 2.5" piping should work very well on the LX.

 

[Poloshirtman]

Yeah, there is not much made for the non-Si cars. Your best bet, and actually fairly inexpensive option, is to find a local exhaust/muffler shop and have them fabricate a custom system for you. Vibrant make a lot of nice exhaust components so you could pick out a resonator and a muffler and let the shop do the rest of the welding and fitment. 2.5" piping should work very well on the LX.

Well why wont it work with a non si? I mean I know the piping has a pathway but is it a different pathway on the si compared to the non si? Or is it just that the piping is differe t sized and it would have to get an adapter?

 

[webby]

si and non si have totally different exhaust setups and you wouldn't want to run a 3" exhaust on a non-si.
/
/


Non SI exhaust up top

Si exhaust below

 

[Poloshirtman]

ok so are there any options for me that would make it sound loud like the megapower?

 

[Michal006]

Yes straight pipe.

 

[webby]

View: https://www.youtube.com/watch?v=ltd7y26vz-g


View: https://www.youtube.com/watch?v=eLi-EeXSEoo


View: https://www.youtube.com/watch?v=rHQVbp0ijwQ

ok so are there any options for me that would make it sound loud like the megapower?

if you've heard the megapower that'd be the SI

 

[webby]

Yes straight pipe.

View: https://www.youtube.com/watch?v=zGml84qMsgc

 

[webby]

View: https://www.youtube.com/watch?v=v7DZiR812_w

 

[webby]

actually found a r18 straight piped
View: https://www.youtube.com/watch?v=4HpSJCXexgc

 

[Poloshirtman]

How do I get a straight pipe catback for an r18?

 

[Flightmaster127]

Go to any exhaust shop and ask them to make a custom 2.5" exhaust. Just tell them you want straight pipe.

 

[webby]

cut off your muffler & weld in a piece of pipe in it's place.

 

[derekfriedrice]

I also vote for downpipe. do it.

 

[twister8008]

I researched mufflers for days until I was exhausted... [emoji12]