18x9 +45?

[cesar brandley]

@webby looks fine and i'm not that dropped ,so i can run that fitment with eyes closed!!

 

[webby]

@webby looks fine and i'm not that dropped ,so i can run that fitment with eyes closed!!

That pic isn't a 9th gen. I just showed that pic to illustrate where a 235 tire would sit on the rim. Compare that to panda's clearance of 6mm to the strut & make your choice.

 

[Nix]

I bet you will rub and have issues. Just from my experience trying to run very very tight fitments. I looked at lots of pics, threads, and even emailed people, still rubbed at stock height. Be ready to do fender work. Remember, just cause it fits going straight doesn't mean it won't rub hard on a bump or a turn or even with one extra person in the car.

 

[FG4 Pjay]

Im actually running 18x9.5 +35 at a 4-5 inch drop. I did have to get my rears slightly rolled barley even noticeable but thats just cause im tucking the lip. You should do fine if you run maybe a 205/40 tire on your wheel.

 

[math_fb6]

Here is a decent picture, will try to get a better one tonight. Running H&R springs with koni shocks

View attachment 39087

whats the tire size are you runnin?

 

[FRDRICE]

At the moment I am running 225/40 Potenza S-04s. It rubbed just a tad bit under hard compression in the front with the 5mm spacer so I had to trim one of the tabs that holds the fender liner.

 

[JayFB2]

Here is a decent picture, will try to get a better one tonight. Running H&R springs with koni shocks

View attachment 39087

What are your wheel specs here i tried on my buddies wheels that are the same as yours 18x9.5 +45 with a 215/40 tire and they fit! went to buy a set of my own same exact specs amd dont fit and i still dont know why...any way i am just trying to see what people are running that actually fit good!

 

[FRDRICE]

What are your wheel specs here i tried on my buddies wheels that are the same as yours 18x9.5 +45 with a 215/40 tire and they fit! went to buy a set of my own same exact specs amd dont fit and i still dont know why...any way i am just trying to see what people are running that actually fit good!

Mine are 17x9, I would imagine that your wheels are likely hitting the strut? I had to run a 5mm spacer in the front in order to clear the OE strut once I added camber.

 

[JayFB2]

Mine are 17x9, I would imagine that your wheels are likely hitting the strut? I had to run a 5mm spacer in the front in order to clear the OE strut once I added camber.

Yeah hitting the front strut alot...to the point where i cant even torque them on

 

[webby]

has your suspension/camber/spacers/anything changed?

 

[Chambers805]

Here is a decent picture, will try to get a better one tonight. Running H&R springs with koni shocks

View attachment 39087

ohh that's pretty.