Death_roll's GC6 Backroad Killer

death_roll

Well-Known Member
3,780
2,593
Always
Vehicle Model
a happy face
Because I want to see the winter setup on the douchemobile! :giggle:

Rockin' all seasons on the 17"s bro, the forester wheels were put on my dad's car.

I do have a really old set of snows that I'll use if the weather gets really bad.
 

death_roll

Well-Known Member
3,780
2,593
Always
Vehicle Model
a happy face
To bump my stupid thread up, I've since installed the following parts:

$50.00 used Injen intake (mad sound bro)
Group N front control arm bushings
Perrin transmission mount
Turn in Concepts shift linkage
Paranoid fabrications fender braces

And...have the following to install / order:

Whiteline 22mm rear swaybar
Whiteline HD swaybar mounts
Kartboy rear endlinks
05-06 Saabaru aluminum trailing links
All new rear suspension hardware
Ordering new OEM rear trailing links
Ordering new OEM / or junkyard trailing arms
Group N trailing arm bushings
...and 16 x 7 wheels with 225/45R16 Dunlop Z2 Star Specs
 

death_roll

Well-Known Member
3,780
2,593
Always
Vehicle Model
a happy face
did you kill your re11's you had?

Actually sold them after the dragon, after I got the all seasons on. Would rather have a dedicated set to swap out rather than always having Z2s on.

The car might need a RR wheel bearing, so I think I'm going to install most things next weekend then get the wheel bearing and alignment done at a dealership. They have Subaru specific tools that can remove bearing w/o removing the hub from the car.
 

death_roll

Well-Known Member
3,780
2,593
Always
Vehicle Model
a happy face
I spy some of the parts you got at Mach V ;)

Yep, just finished ordering everything else, new OEM lateral arms (steel), and trailing arms for a WRX, has a slightly different bushing, and urethane rear trailing arm bushings.

Should be doing everything next weekend, then the car will go in for an alignment and rear wheel bearing.
 

death_roll

Well-Known Member
3,780
2,593
Always
Vehicle Model
a happy face
Got the swaybar, endlinks, and HD mounts installed tonight. Kinda spur of the moment plus it was a nice night for some garage work. Also, I want to spread the work out a little so I'm not doing everything this weekend.

Now the car feels proper, corners flatter and the rear rotates around the front much more aggressively, went from a 19mm bar on full stiff to a 22mm bar on the medium setting. Snapper a quick pic after installation.
ImageUploadedByTapatalk1427773593.300051.jpg
 
Top