ultimate race downpipe

[bill silvis]

hey guys, do any of you know if the ur downpipe for a sedan will fit a coupe? i cant seem to find any concrete answers, i checked skunk2s website and it has the part number the same for sedan and coupe but ur website doesnt say anything there is a guy close to me selling one for cheap but hes got a sedan and i wasnt 100 percent sure if it would fit, if it has a defouler i can run without a tune until i can get one correct?

 

[bill silvis]

im asking about a catted downpipe, forgot to mention that

 

[7civics]

It will fit, the DP's are the same for the sedan/coupe - its the catback that differs.

 

[bill silvis]

Cool thanks man. Do you know what the power difference is I read it's minimal between catted and catless something like 5-6 hp

 

[323]

Cool thanks man. Do you know what the power difference is I read it's minimal between catted and catless something like 5-6 hp

it's less than that usually, 2-3 hp from what i've read. 4 at the most but even at 5 or 6, it's not worth the smell and emissions in my opinion.

 

[7civics]

Cool thanks man. Do you know what the power difference is I read it's minimal between catted and catless something like 5-6 hp

It could be as little as stated or much higher depending on your application.I m supercharged and had to trade out my catted dp for a catless as I was leaving a lot of power on the table due to hitting a wall in tuning after adding new parts. In my case we are talking around 20-30whp. It also depends on the cell count of the cat used, higher count are more restrictive - I believe most HFC's are 200-300 cell count.

 

[bill silvis]

@323 Emissions is right now my biggest concern, after flashpro i know it wouldnt throw a code but i dont think the hassle with having to put the stock one back on to pass a visual is worth it, and for forced induction i agree. id really like to make an all motor build. i would love to get my hands on some cams if they ever are released unless im missing them on someones site. i saw bisimoto made something but im not entirely sure if they are a production part.