Anyone Have Spacers on OEM '12, '13 Rims?

[hotdogjohnny]

I put Acura RSX-S rims on a while ago and they have 20mm rear 15mm front spacers to correct the stance. I think that the oem rims' stance would benefit from spacers, too, but have no idea how much. IIRC, someone did 5mm spacers, but no pictures posted. If you have any info, especially pics, I'd like to see them.

 

[Dar-Dar]

@thevietkid33 has spacers on his RSX-S wheels!

 

[hotdogjohnny]

^^^That's where I got my info on spacers for those rims, but now I want to put my oems on with a slighlty more agressive stance than stock. I like the way my RSX-S rims look and want the same for the oems.

Here are the present rims:

 

[webby]

@Sleepingpanda has spacers, but he's not on stock wheels.

Are you thinking about going back to stock...or you are on stock wheels now? Take a measurement from the rip to the edge of the fender and see what that is. Convert it to mm, and that gives you an idea on how much you could push them out towards the fender.

 

[hotdogjohnny]

^^^Thinking about going back to stock. Want a little more agreesive stance than I recall when stock.

 

[webby]

according to a thread on clubrsx -
Stock Offset and Sizes-
'02-'04: 16x6.5" with +45mm offset.
'05-'06: 17x7" with +45mm offset.

The 2012 si has 17x7 +45 stock, so you'd be looking at the identical spacer setup

 

[hotdogjohnny]

Hmmm. For some reason, the RSX rims seemed really inset w/o spacers. I'll do some measuring.

 

[liljusepy]

Search my name for my build thread, I have 15mm fronts and 20mm rears on my 13 si wheels.

 

[webby]

Search my name for my build thread, I have 15mm fronts and 20mm rears on my 13 si wheels.

here is a link

http://9thcivic.com/forum/threads/time-for-a-thread-13-tw-sedan.8048/page-3#post-203714

 

[Pauly99to17]

I plan on adding these to my CSX Type S rims. Will use same spacers as @hotdogjohnny .

 

[hotdogjohnny]

@liljusepy
@webby Thanks! That's exactly what I was looking for. I like it.