boejoula
Well-Known Member
- 215
- 68
- Vehicle Model
- Civic Si
- Body Style
- Sedan
It there's no screw, you probably just have to pop it out
DIY Replace fog light bulbs with LED, stock replacement or HIDS or any kind of bulb
- Thread starter EJ8*
- Start date
TheKhmerboy92
Well-Known Member
Here some pics
DRL LED with 20000k
Low Beam and Fog lights and both are 10000k
Here some pics when I turn on High beam and as you can see, if you want to put the LED for DRL you will have to sacrifice the brightness of your high beam.
DRL LED with 20000k
Low Beam and Fog lights and both are 10000k
Here some pics when I turn on High beam and as you can see, if you want to put the LED for DRL you will have to sacrifice the brightness of your high beam.
bigbossin
Well-Known Member
Once you remove the assembly there should be screws on the back side
Monk
Well-Known Member
I was hoping there was an easy way to take them off without taking the bumper off......... Thinking about paintng covers.......... But it's not that important.......
If someone happens to know where to pop from would be nice.......
bigbossin
Well-Known Member
Ooooo thres a screw in the front it blends in pretty good
Kurt Muehlbauer
Well-Known Member
- 201
- 65
Is this going to cause any issues with power or frying of hardware? Has anyone put LEDs into their headlights?
Monk
Well-Known Member
Thx, but I have an EX Coupe ....... just went and looked with a flashlight, no screw...... need someone with a Coupe that's taken theirs off.
boejoula
Well-Known Member
- 215
- 68
- Vehicle Model
- Civic Si
- Body Style
- Sedan
I wouldn't do LEDs as your headlight low beam if that's what your talking about. You won't be able to see a thing.
bigbossin
Well-Known Member
Check the PDF on college hill honda
Hopefully that can help you out
Monk
Well-Known Member
That was a good idea, I tried them and Hondas, but the detail sucks....... Thx anyway..........
TheKhmerboy92
Well-Known Member
I put LED for my high beam and it's look good
- Staff
- #72
- 52,105
- 22,314
does this help you any? I've not seen the coupe, but it looks like it has 9 retaining tabs and then has 3 screws as well.
-----
===
bumper removal if this doesn't help?
View: http://www.youtube.com/watch?v=YCeXxNhZ_hY
- Staff
- #74
- 52,105
- 22,314
pdf accessory install info for the 2012 coupe -
http://www.collegehillshonda.com/instructions/civic/2012/2dr/foglights.pdf
http://www.collegehillshonda.com/instructions/civic/2012/2dr/foglights.pdf
Monk
Well-Known Member
OK, I see how to find use PDF's now, thx.
Monk
Well-Known Member
Just to say that 1st thing I found wasn't a pdf , it was some other exploded view........ the pdf is very clear....... thx.
- Staff
- #77
- 52,105
- 22,314
yeah, most of the installation pdf's are good. If they don't have it listed on their site, I have a lot of them posted in the accessory area or here:
http://9thcivic.com/forum/pages/2012-Civic-2-door-moonroof-visor/
click a topic on the left, and it'll load on the right hand window. It'll allow you to zoom in on the right hand pane after things load etc.
http://9thcivic.com/forum/pages/2012-Civic-2-door-moonroof-visor/
click a topic on the left, and it'll load on the right hand window. It'll allow you to zoom in on the right hand pane after things load etc.
boejoula
Well-Known Member
- 215
- 68
- Vehicle Model
- Civic Si
- Body Style
- Sedan
bigbossin
Well-Known Member
I was trying to get you to that earlier
Monk
Well-Known Member
Yea .... I saw yours 1st and went to look for it but couldn't find it, then when webby showed that graphic. I realized it could be found on a mod' with in the site. And now I know there is a whole bunch of them listed at the bottom of our forum page. Very helpful for taking plastics apart, I say that because plastics are the worst if we don't know "how" to separate them. Looks like the fog cover will pop out like the bumper comes off after undoing a few screws, but I wouldn't have pulled on either one not knowing if it can be done.