Wheel Fitment Charts!

Hey guys I have a question I planing tk buy some 18x9.5 wheels but I dont really know the offset. I was thinking 38 35 or 22 but I need help, im willing to run camber I already have -3 in the rear -1 in the back, also planning to get some 235 35 18 tires falken fk 512. And my previous setup were varrstoen es2 17x9 30 215 45 17. Thanks guys
 
i didnt want to make a new thread, so i'll just post this question here.
In the summer i want to go a bit lower now that i'm on coils, what do you think is the lowest i can go on stock wheels/tires before it starts to rub on the fender?
 
323 said:
i didnt want to make a new thread, so i'll just post this question here.
In the summer i want to go a bit lower now that i'm on coils, what do you think is the lowest i can go on stock wheels/tires before it starts to rub on the fender?
Click to expand...
unless you put spacers, it shouldnt rub unless you go really low (like max out the coilover) I know the front rubs a little when turning if its max low on bc coils.
 
AlienPrime said:
unless you put spacers, it shouldnt rub unless you go really low (like max out the coilover) I know the front rubs a little when turning if its max low on bc coils.
Click to expand...
good to know, thanks
 
I noticed a bunch of the RPF1s don't have center caps... Do they not come with center caps or.....
 
hjscura said:
I noticed a bunch of the RPF1s don't have center caps... Do they not come with center caps or.....
Click to expand...

No they do not, you have to buy the center caps, they are optional and I think they go for a little less than 90 bucks for all four.
 
yeah its super dumb!! My wheels didnt come with center caps either! Advan wanted $300 for 4 caps. so i said **** it and i bought $20 ebay ones and put red honda decals on them hahahaha
 
Do any of you know the specs I can run without having camber arms? And would I need camber arms for running a 18x9+25? And if I do run those specs. What size tires would I need?
 
Hey so I'm don't know much about wheel fitment. I really like these 17x9's +22 that I saw and what to get I'm currently on skunk 2 springs. What do u guys think I need to do to make this work? Any help is much appreciated.
 
Hey will these fit? Pretty sure they will just wanna double check before I get them
pe3e2y8u.jpg
 
you're trying to go as wide as possible without fender work? I have 18x9+29 Advan RS's and they almost never rub. im on hfp suspension, with 225/40/18 tire (biggest tire i could go with without rubbing)

255's on 9.5" wide with rub like mad
 
You must log in or register to reply here.
Back
Top