Dar-Dar
Mordorator
- 19,329
- 9,901
- Vehicle Model
- Civic Si
- Body Style
- Fiji Blue Pearl Coupe Coolest Member Since: May 15, 2011
Your monitors are on top of stacked sticky note packs?My work....
Official Computer Talk Thread
- Thread starter bootyluvr
- Start date
- Staff
- #122
That's gangsta.
- Thread starter
- #123
Not a bad idea!!
- Staff
- #124
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
They are just regular note pads.....sticky pads would cost too much and I would get the purchase request denied. Just like a true monitor stand would get denied and would be told...."Why do you need them for?"
- Thread starter
- #125
Well if you have problems viewing it since it's not low/high enough for you that could cause neck problems lol
- Staff
- #126
- 10,252
- 6,963
- Vehicle Model
- Toyota Tacoma TRD Sport
- Body Style
- @bootyluvr hates hatches
I said that but they still do not want to spend a dime.
Intrepid
Well-Known Member
I used to build computers at a high end gamers and overclockers Shop here in Winnipeg. My last system i built for myself while working there was a overclocked P4 2.4 C, had the new at the time corsair ram with the LED's on the tops of the modules, had it water cooled with a tranny cooler as a radiator, had the interior of the case powder coated white and had the outside of the case painted at a body shop base coat / clear coat dark titanium. That machine actually lasted me almost 7 years before the raid controller crapped out in it and i had to replace it.
here is a list of the hardware that was in this machine at time of building ( remember that this is 2002 or so)
Asus P4C800-E Deluxe Mother Board
2 36 gig Western Digital Raptors (Striped)
2 500 gig sata Hard Drives for storage
Ati 9800 XT
Antec True Blue power supply
2 1 Gig corsair PC4000 w/LED
Plextor CVC Burner
and here are a few of the pics of it when it was assembled
At the time the machine was $5000 no monitor, or keyboard or mouse, thought that it was totally insane and a waste of money but in the long run it paid off, this machine ran rock solid overclocked to 3 Ghz for almost 7 years before it finally gave up the ghost and at that time i was still saying i had no need to replace it cause it was still a fast machine, only lacked a bit in video editing and rar files. Replaced it with a store bought Acer with a quad core i7 w/8 gigs of ram and dual 22" Samsung wide screens. I find the new machine slower in alot of things but unless i want to swap hard drives i am just gonna have to live with it.
here is a list of the hardware that was in this machine at time of building ( remember that this is 2002 or so)
Asus P4C800-E Deluxe Mother Board
2 36 gig Western Digital Raptors (Striped)
2 500 gig sata Hard Drives for storage
Ati 9800 XT
Antec True Blue power supply
2 1 Gig corsair PC4000 w/LED
Plextor CVC Burner
and here are a few of the pics of it when it was assembled
At the time the machine was $5000 no monitor, or keyboard or mouse, thought that it was totally insane and a waste of money but in the long run it paid off, this machine ran rock solid overclocked to 3 Ghz for almost 7 years before it finally gave up the ghost and at that time i was still saying i had no need to replace it cause it was still a fast machine, only lacked a bit in video editing and rar files. Replaced it with a store bought Acer with a quad core i7 w/8 gigs of ram and dual 22" Samsung wide screens. I find the new machine slower in alot of things but unless i want to swap hard drives i am just gonna have to live with it.
- Thread starter
- #129
I remember when PC hardware was very expensive! Stuff has came down tremendously! That's good tho
I remember the Corsair RAM with the LEDs on top!! I had a set.
I remember the Corsair RAM with the LEDs on top!! I had a set.
Winnn420
Well-Known Member
My PC is not much to speak of but I just got done installing a new Samsung security system in my office and I love it! It was so easy, just plug & play...after I ran all the wires through the ceiling anyways.
PC is just a HP Pavillion HPE with HP 2310m monitor. Not sure of the exact specs, it was the best HP in stock at Micro Center
PC is just a HP Pavillion HPE with HP 2310m monitor. Not sure of the exact specs, it was the best HP in stock at Micro Center
- Staff
- #132
- 56,898
- 24,201
security cams setup to record off the pc hard drives?
Winnn420
Well-Known Member
Actually the monitor has a built in DVR but yes it will be tied into my network so anyone can look at it on their PC when they hear someone come in the office.
- Staff
- #134
- 56,898
- 24,201
ah, so that monitor is specific to the security package you bought. Is it monitored by an outside company at all, or it's more about just having a video feed of certain areas for the business?
Winnn420
Well-Known Member
Yea the monitor is part of the package, the box only contained the 4 cameras and the monitor/DVR. It has an ethernet port on the back so its easy to tie it to our network, once I get another ethernet jack dropped in my office. I'm buying some monitors today so each PC in the office will now have dual monitors with one designated for the cameras.
- Thread starter
- #136
Nice PC Winnn. What kind of company do you work for?
Winnn420
Well-Known Member
Thanks...it's a health insurance consulting firm my dad and I started 5 years ago.
- Thread starter
- #138
Oh gotcha. Family business.
I took some pictures of my PC/setup. Will post later after I get home from watching fireworks.
I took some pictures of my PC/setup. Will post later after I get home from watching fireworks.
- Thread starter
- #139
I'm not a fan of this desk but it works...
I actually did some better cable management inside the case and had to move the optical drive down one slot so this pictures are from Friday and I should take new ones lol
I actually did some better cable management inside the case and had to move the optical drive down one slot so this pictures are from Friday and I should take new ones lol
- Staff
- #140
- 56,898
- 24,201
I picture that pc having a pretty loud hum to it with the venting/case fan setup.