OEM Switches?

Gugs

Gugs

Well-Known Member
Messages
16
Reaction score
18
Location
San Francisco Bay Area
Vehicle Model
Si
Body Style
Sedan
Hi guys. I have a question about switches or other OEM items that may reside where these blanks are on my '13 Si.

What do you guys have occupying these spaces on the non -Si? Fog light switch? Rear fog light switches in non-US models? Oil slick or smoke screen?ImageUploadedByTapatalk1393886665.749971.jpg
 
Very cool. Thank you! Do you think you could snap a close up of the switches? The ambient lighting is pretty sweet!
 
What is the middle switch? You had mentioned ambient lighting... is that a OEM switch?
 
i have all three filled as well
Bixenon, footwell lighting, center console lighting
5 wires each switch, fills up fast! Here is a pic in testing phase hahahah!
only rates to 15A tho. Never exceed that!
FWiqoXd.jpg


Here it is all completed :)
1USzOoQ.jpg
 
Yoshiix3 said:
where did u get the fog light switch both fo the aftermarket foglight i bought has switches that are bigger then the slot
Click to expand...

Welcome to the forum.

The button came with the Spyder Fog light kit that I bought.

http://9thcivic.com/forum/threads/pics-just-installed-spyder-oem-fog-lights-on-lx-coupe.6353/

I had to trim the button a touch for it to be flush. Plus, it was getting stuck a little bit because it was a little too long and would getter sandwiched/pinched when I pushed the button in to turn them on. You can see the cut I did here.....

http://9thcivic.com/forum/threads/paulys-youre-my-boy-blue.6598/page-14#post-218046
 
Last edited:
In the '13 Coupe EX-L, the only switch occupied is the traction control off button. The other two are blank. The EX-L comes with fog lights standard, so the fog switch is a rotating dial on the headlight/turn signal control stalk. The EX-L also has auto headlights so the control stalk is different than lower models.
 
You must log in or register to reply here.
Back
Top