323's Build

I miss working on my car....
AkcVPRH.jpeg
 
hey i saw those projector head lights on flea bay... have u installed it yet?PICS puhleezeeeeeee
 
I saw a pic on a fb page. It's very Tron like. Pretty cool looking.
980830_10200623965754885_1856928284_o.jpg
 
323 said:
I have a problem, my wires keep popping out and i cant make them stay under
Here's what i'm trying to describe:

I tried staples but the carpet isnt thick enough and they just pop out.
Any ideas? i'm about to do some more wiring but i wanted a way to keep my wires at bay before i start another project
Thanks!
Click to expand...
are the wires ran on the inside of the seat belt or the outside?
 
chadoku said:
hey i saw those projector head lights on flea bay... have u installed it yet?PICS puhleezeeeeeee
Click to expand...

lol they just got shipped out today, i should be getting them soon tho
 
bigbossin said:
are the wires ran on the inside of the seat belt or the outside?
Click to expand...

the outside, i tuck them underneath the piece of plastic along the floor by the door, and they just come out
 
323 said:
the outside, i tuck them underneath the piece of plastic along the floor by the door, and they just come out
Click to expand...
know its probably a has to pull it all apart but when I was installing car audio wires I had to run it on the inside so I wouldn't run into that problem. hope this help you out
 
bigbossin said:
know its probably a has to pull it all apart but when I was installing car audio wires I had to run it on the inside so I wouldn't run into that problem. hope this help you out
Click to expand...

i think i'm going to try webby's suggestion and sip tie them, then stuff them under and hopefully with the zip tie it'll be thick enough so it doesnt sneak out. we'll see!
thanks tho, i just dont want to do all the work of ripping up those panels lol
 
323 said:
i think i'm going to try webby's suggestion and sip tie them, then stuff them under and hopefully with the zip tie it'll be thick enough so it doesnt sneak out. we'll see!
thanks tho, i just dont want to do all the work of ripping up those panels lol
Click to expand...
I know what you mean. good luck let us know how that goes
 
  • Like
Reactions: 323
323 said:
lol they just got shipped out today, i should be getting them soon tho
Click to expand...

reason is I couldnt quite picture it on my ride, its one of those things thats either a hit or miss... know wat im sayin
 
chadoku said:
reason is I couldnt quite picture it on my ride, its one of those things thats either a hit or miss... know wat im sayin
Click to expand...

yea i know, i just cant wait to see them on mine
 
Alright! Success! Just like mine except you put the rays going down which i should have done. I really need to change mine. A+
 
Last edited:
Pauly99to17 said:
Alright! Success! Just like mine except you put the rays going down which i should have done. I really need to change mine. Make sure to post this video in the 5 pin thread. A+
Click to expand...
Yea, the wiring is still a mess right now tho, it got too dark and I couldn't finish so I just zip tied the rest of the wires together for now
 
You must log in or register to reply here.
Back
Top