for tuned civic si and non si owners.

[samRai]

INCAR PC 6 Rally Mobil Curico 2012 Barbosa - Vera Honda Civic Coupe N°28


View: http://youtu.be/Cq1s6KIB8QA


View: http://youtu.be/sRpRuEeoJPw

anyone here who have experience using or knows about flash pro? pls. check if the car was modified or tuned? Thanks.

 

[webby]

looks to have the normal r18 engine,...but the normal plastic cover on the ecu is off in these pics...

original car -

starting to strip it down

I'm sure it has some type of tune on it, but who knows what it is. It could be direct from honda, since this team is tied to their name. You could shoot them a message and ask what their 2012 coupe uses for tuning - https://www.facebook.com/pages/Honda-Racing/130330357055338

 

[samRai]

looks to have the normal r18 engine,...but the normal plastic cover on the ecu is off in these pics...

original car -

starting to strip it down

I'm sure it has some type of tune on it, but who knows what it is. It could be direct from honda, since this team is tied to their name. You could shoot them a message and ask what their 2012 coupe uses for tuning - https://www.facebook.com/pages/Honda-Racing/130330357055338

I really like all the photos. now i have evidence that the 9th gen r18 also has the spirit of a race engine. I'll try to ask everything about the car, i just hope that they're nice and helpful.
Thank you Sir Webby for posting this and also for your support. that's why i like this site, "all positive people"

 

[Nix]

Could be an R20 bottom end. Those are pretty strong paired with an 8th gen ECU to run hondata and a turbo would be a nice race engine. If they aren't worried about the dash functionality and are just running race gauges they shouldn't have any issues. The R blocks are perfect for a turbo or high compression setup as the oil jets in each cylinder are for cooling and efficiency which work great with the boosted setups.

edit: The r20 bottom comes out of the CR-V I believe.

 

[webby]

crv has a k24 engine

 

[Nix]

eh I had to go look it up... older CR-Vs and Accords non US market though.... I couldn't remember where I had read it. Probably a much easier swap for those guys if they are not US based.

R20A1

Found in:
2007- Honda CR-V (RE1, RE2)
Displacement: 1,997 cc (121.9 cu in)
Compression: 10.5:1
Bore & stroke: 81.0 × 96.9 mm (3.19 × 3.81 in)
Power: 150 PS (110 kW; 148 bhp) @ 6200 rpm
Torque: 19.4 kgf·m (190 N·m (140 ft·lbf)) @ 4197 rpm
R20A2

Found in:
2007- Honda CR-V (RE5)
Displacement: 1,997 cc (121.9 cu in)
Compression: 10.5:1
Bore & stroke: 81.0 × 96.9 mm (3.19 × 3.81 in)
Power: 150 PS (110 kW; 148 bhp) @ 6200 rpm
Torque: 19.4 kgf·m (190 N·m (140 ft·lbf)) @ 4200 rpm
R20A3

Found in:
2008- Honda Accord (CP1)
Displacement: 1,997 cc (121.9 cu in)
Compression: 10.5:1
Bore & stroke: 81.0 × 96.9 mm (3.19 × 3.81 in)
Power: 156 PS (115 kW; 154 bhp) @ 6300 rpm
Torque: 19.3 kgf·m (189 N·m (139 ft·lbf)) @ 4300 rpm

 

[samRai]

Could be an R20 bottom end. Those are pretty strong paired with an 8th gen ECU to run hondata and a turbo would be a nice race engine. If they aren't worried about the dash functionality and are just running race gauges they shouldn't have any issues. The R blocks are perfect for a turbo or high compression setup as the oil jets in each cylinder are for cooling and efficiency which work great with the boosted setups.

edit: The r20 bottom comes out of the CR-V I believe.

Is it RDX? Acura..
I read that some where.. About the r18 engine that can be change and use some parts from RDX, about the Turbo. I forgot what article, when i saw it.

 

[samRai]

But i think Honda Racing will not change something in the engine. Honda Pride it's all motor. Honestly when i saw the pilot driving 1.8 civic manual i compared it to mine. I notice that his rpm is always above 4000 and keeping it in high rev for vtec. That means the spec is all the same. 1000 -30000 rpm the ecu knows that's for cruising. But in 4000 above that is High rev and High performance. I don't know the auto but in manual transmission you can manipulate the 1000-3000 rpm. " is that means no tuning? "

 

[samRai]

Also k24 is just for U.S. Model? Cause type r euro using the k20?

 

[wondermalt]

R18!

 

[webby]

8th Gen Euro Type R =

The car’s high-revving 2.0-litre VTEC engine is to blame, as it does not meet forthcoming Euro V emissions regulations. Instead of reengineering the unit to meet the stricter standards, which come into force for all new cars in January 2011. European customers will soon be able to opt for the 2015 Type R with its new Earth Dreams 2.0-liter turbo engine producing more than 276 horsepower.

 

[samRai]

8th Gen Euro Type R =

for Euro again.

 

[samRai]

Could be an R20 bottom end. Those are pretty strong paired with an 8th gen ECU to run hondata and a turbo would be a nice race engine. If they aren't worried about the dash functionality and are just running race gauges they shouldn't have any issues. The R blocks are perfect for a turbo or high compression setup as the oil jets in each cylinder are for cooling and efficiency which work great with the boosted setups.

edit: The r20 bottom comes out of the CR-V I believe.

your right Sir.

 

[samRai]

eh I had to go look it up... older CR-Vs and Accords non US market though.... I couldn't remember where I had read it. Probably a much easier swap for those guys if they are not US based.

R20A1

Found in:
2007- Honda CR-V (RE1, RE2)
Displacement: 1,997 cc (121.9 cu in)
Compression: 10.5:1
Bore & stroke: 81.0 × 96.9 mm (3.19 × 3.81 in)
Power: 150 PS (110 kW; 148 bhp) @ 6200 rpm
Torque: 19.4 kgf·m (190 N·m (140 ft·lbf)) @ 4197 rpm
R20A2

Found in:
2007- Honda CR-V (RE5)
Displacement: 1,997 cc (121.9 cu in)
Compression: 10.5:1
Bore & stroke: 81.0 × 96.9 mm (3.19 × 3.81 in)
Power: 150 PS (110 kW; 148 bhp) @ 6200 rpm
Torque: 19.4 kgf·m (190 N·m (140 ft·lbf)) @ 4200 rpm
R20A3

Found in:
2008- Honda Accord (CP1)
Displacement: 1,997 cc (121.9 cu in)
Compression: 10.5:1
Bore & stroke: 81.0 × 96.9 mm (3.19 × 3.81 in)
Power: 156 PS (115 kW; 154 bhp) @ 6300 rpm
Torque: 19.3 kgf·m (189 N·m (139 ft·lbf)) @ 4300 rpm

I saw one post at hondata forum that He owns a CRV EUR and got the 8th U.S. Civic R18 Hondata Flash Pro. it work in CRV EUR. but this post was posted by just a person non Hondata employee. just got curious about it.thanks

 

[webby]

did they ever respond to you on facebook?

 

[samRai]

did they ever respond to you on facebook?

Right now I haven't send any message. cause this past few days i got so busy. I will when I have more time. I'll let you know Sir.
Thanks.

 

[samRai]

I send them message and it's almost 2 weeks now. I haven't receive any respond. I also send them the site info in case they wanted to assist or help the non SI civic.

 

[samRai]

did they ever respond to you on facebook?

I send them message and it's almost 2 weeks now. I haven't receive any respond. I also send them the site info in case they wanted to assist or help the non SI civic.

 

[samRai]

did they ever respond to you on facebook?

Honda Racing
hello
sorry for the delay in responding.
Our civic 1.8 running on the N3 category, which does not do anything with motors must be manufactured, which is in the electronic work (motec) en escape (weapon) and especially we remove weight the car. Our cars weigh 1,180 klg.
The other big advantage is the gearbox, use a manufactured in Argentina, Dogbox with the adjusted ratios for types of road.
The difference with the rest of the cars, not the power or torque, is the excellent chassis having allowed the car go faster in the fast corners
Jun 16 · Sent from Web

 

[webby]

so they're using motec to control the ecu it sounds like.... probably something along the lines of the m400
http://www.ebay.com/itm/MoTeC-M400-ECU-/170732790854