Will rota torque 18x9.5 +28 fit si sedan?

[coryhead]

Looking at these wheels, wondering if they will fit.
http://forums.nasioc.com/forums/showthread.php?t=1986850

 

[webby]

from stock to that -
inner clearance - 15mm less
outer clearance - EXTEND an extra 49mm


2012 Civic SI wheel: 5 x 114.3 bolt pattern, 17 x 7 offset 45mm
http://www.1010tires.com/wheeloffsetcalculator.asp

an 8th gen setup -

Ingalls Front camber bolts
Ingalls Rear camber kit
Enkei Nt03+M 18x9.5 +27 w/ a 5mm spacer because of clearance issues.
Federals 215/35/18
Buddy Club N+

You'd have to take some measurements - I don't know how close it'd be on a 9th.... (especially since there are only a few options for lowering springs/coilovers)

 

[coryhead]

Car would be stock as far as suspension goes for now. Have looked at the h&r springs though.

 

[Winnn420]

that's crazy, i didn't know you could fit 215's on a 9.5" wide rim...would he do that for clearance issues, to have much less sidewall to rub?

 

[webby]

yeah, I'm guessing to avoid rubbing... a 9.5" could run 255's... 265's

 

[Winnn420]

I thought the description above was saying he used 215/35/18 on 18x9.5's..didn't sound right.

thanks for answering all my noob questions webby

 

[webby]

No, you're right. He claimed 215's. I was just saying what a normal 9.5 should be.

 

[Nix]

You will probably need to do some fender work and run a lot of neg. camber.