pssstitsmike
Well-Known Member
- 167
- 105
Here are pics of spyder oem style fog lights on lx coupe
Pics just installed spyder oem fog lights on lx coupe
- Thread starter pssstitsmike
- Start date
Monk
Well-Known Member
I'm not seeing anything???????
- Thread starter
- #3
pssstitsmike
Well-Known Member
- 167
- 105
It shows on my phone browser with full images
- Thread starter
- #4
pssstitsmike
Well-Known Member
- 167
- 105
Try using a different browser
Monk
Well-Known Member
It finally showed up on this browser....... I tried G-Chrome but couldn't log on .....Forgot my secret stuff(password). I write them down usually but can't find this one. And, it wouldn't transfer to the other browser, no wonder I don't get around to changing browsers........
Anyway......... The light mod looks sweat.
Anyway......... The light mod looks sweat.
- Thread starter
- #6
pssstitsmike
Well-Known Member
- 167
- 105
Thanks
- Thread starter
- #7
pssstitsmike
Well-Known Member
- 167
- 105
The fog light kit even came with a nice looking switch that fits right
- Staff
- #8
- 52,105
- 22,314
lights and switch both look great 
- Thread starter
- #10
pssstitsmike
Well-Known Member
- 167
- 105
Got it from carid.com 120$
- Thread starter
- #12
pssstitsmike
Well-Known Member
- 167
- 105
Wiring was super easy. One white wire to battery 2 black wires to ground and run the green switch wire and switch harness through the fender firewall. Green switch wire can go to accessory fuse using add a circuit. Hardest part was getting wires through the firewall.
- Thread starter
- #13
pssstitsmike
Well-Known Member
- 167
- 105
- Thread starter
- #14
pssstitsmike
Well-Known Member
- 167
- 105
Here is how you get through the firewall
- Thread starter
- #16
pssstitsmike
Well-Known Member
- 167
- 105
cool. U will like it. If u have any questions you can message me. Make sure you buy the add a circuit to mini fuse to tap into accessory for the green wire. Other than that it is simply 2 black ground wires and white power wire goes to battery. Make sure you buy a terminal connector to hook it up to the battery. Good luck with the install. Takes about 3 hours from start to finish. The bumper is easy to remove. Its just 12 clips on the bottom 2 screws on each side near the tires and two screws on the grill n a few clips there
- Thread starter
- #17
pssstitsmike
Well-Known Member
- 167
- 105
Oh ya if u dont have a drill for the plug for the firewall u can just use a knife to cut a hole into the rubber. To get the switch in just pull on the sides. Its all clips surrounding the switch area next to the econ button.
- Thread starter
- #18
pssstitsmike
Well-Known Member
- 167
- 105
Also you need to buy copper wire or speaker wires 16 gauge should work to extend the green signal wire to get it through the firewall and into the fuse box. Or u can tap into ur parking lights for that green wire as well but the space is so small so extending the wire and going to the fuse box was easier for me
- Thread starter
- #19
pssstitsmike
Well-Known Member
- 167
- 105
I will take pics later of how i tapped it into the fuse box. I believe fuse number 19 in the fusebox inside the car is the accesory fuse.