handbrake cable ajustment

[honda@ driver]

Hello folks
I am a newby on this site, hope my 2012 honda civic es 2.2 D-tec is included.
Anyone know how to remove center console to gain access to handbrake cables
I want to release any tension from cables in order to reset handbrake or piston in callipers
I do not want to distroy console as it looks to be click fit, so any help as to ware the realease
points would be most helpfull
thank you in advance of any help offered
dirk

 

[Sarcras]

If I remember right, you need to remove the shift knob and trim around it. Then there are 2 screws (I think) under the arm rest and 4 under the trim you removed around the shift knob. After that there are a few clips at the front under the dash you need to remove. I found this diy that has pictures and more in-depth instructions to remove it.
http://9thcivic.com/forum/threads/2...hift-adapter-and-corsport-base-bushings.5828/

 

[honda@ driver]

If I remember right, you need to remove the shift knob and trim around it. Then there are 2 screws (I think) under the arm rest and 4 under the trim you removed around the shift knob. After that there are a few clips at the front under the dash you need to remove. I found this diy that has pictures and more in-depth instructions to remove it.
http://9thcivic.com/forum/threads/2...hift-adapter-and-corsport-base-bushings.5828/

thank you for your reply and pictures i am hoping as i only need access to the handbrake cables i wont need to remove every thing
thanks again dirk