Hey everyone, Ive been having an issue for the past week, Ive been having a noise coming from the rear passenger side (I think, I know is not by the drivers side) its like my exhaust is hitting on something? Ive had the exhaust and dp for over 4 months now (full race) and never had a problem, I dont know if it could be the exhaust or my springs/camber arms? (D2 springs, spc camber kit) its usually happening when I go from a stop to first and second gear, I hear like a metal to metal contact, but its once in awhile and only happens in 1 and 2 gear once the car is rolling I dont hear anything. What do you guys think I should check? I looked at the exhaust/hangers and everything looks ok there are no scuff or anything that I can say its really the exhaust?
Exhaust rattle?
- Thread starter r18-power
- Start date
- Staff
- #3
- 52,105
- 22,314
I know some had issues around the front heat shield area. Did you bend yours at all?
- Thread starter
- #4
Ok I will check them tomorrow, is there anything I should be looking for?
No I did not but like I said it started happening recently, shouldnt it have happened as soon as I put the exhaust on if it was the shield?
- Thread starter
- #6
Ok so I checked my exhaust and I have a decent clearance
But I did rock my exhaust back and forward with my hands and did hear the metal to metal sound I did not see where its coming from but im guessing its making the noise every time I take off because the exhaust shifts back and forward , but its weird how it started happening just now after 4 months
But I did rock my exhaust back and forward with my hands and did hear the metal to metal sound I did not see where its coming from but im guessing its making the noise every time I take off because the exhaust shifts back and forward , but its weird how it started happening just now after 4 months
- Thread starter
- #7
So I checked under the exhaust again and I noticed that the exhaust hanger in the muffler was not on correctly, I couldn't even see the oem metal hanger and the full race exhaust metal hangers were about to come out of the rubber piece, so I put wd40 and gave it a good push and now everything sits tight, hopefully this was my issue.
