Murcethecurse
Well-Known Member
- 67
- 18
hey guys i just got a set of bbs lms last night and i want to make some changes to it first off can i replace the lip to a biiger one? also where can i find 24k gold plated bolts for it?
bbs lm
- Thread starter Murcethecurse
- Start date
hotshot
Well-Known Member
- 663
- 314
Yes and yes. Lips go for around $250 per lip, 24k bolts go for about 200 or so per set.
I'd try to contact memoryfab.com
I'd try to contact memoryfab.com
Sleepingpanda
Kung-Fu Panda
I know this is an old post. But figured I'd chime in.
The BBS LM is a 2 piece wheel. The face is 1 piece and the barrel including the lip is the other piece. So you can't change the lip without some serious custom work.
However you can reverse mount the face. Meaning unbolt the face of the wheel. And install it from behind the lip and bolt it back on. This will increase the offset approx 15mm. And give the lip a deeper look.
The BBS LM is a 2 piece wheel. The face is 1 piece and the barrel including the lip is the other piece. So you can't change the lip without some serious custom work.
However you can reverse mount the face. Meaning unbolt the face of the wheel. And install it from behind the lip and bolt it back on. This will increase the offset approx 15mm. And give the lip a deeper look.