Adequate Torque Wrench

[WhiteWillie]

Can anyone tell me, Is a 1/2 inch torque wrench, with maximum torque of 150 ft/lbs, adequate to work on an Si?

Thanks in advance.

 

[FooBird]

Only if you're messing with the driveshaft spindles, I haven't seen torque specs above 150 ft. lbs. I have a torque wrench 150 ft.lb. capacity torque wrench myself.

 

[GSquared]

I just bought this one: http://www.brownlinemetalworks.com/torque-wrench.php don't need something crazy like Snap-On just something to have in case I need it. (Plus it was on sale...) It has a max of 150.

 

[Nix]

Whatever the range is, the torque wrench will be most accurate in the middle of it's range. So a 0-150 is mot accurate around 75-80lbs, perfect for lug nuts.

Might want to look into a smaller one with a shorter range for a lot of the other bolts with the approx 30lb torque specs. Lots of suspension parts fall in that range.

 

[webby]

some torque specs
http://www.collegehillshonda.com/instructions/civic/2012/4dr/civic_torque_specs.pdf

 

[Dar-Dar]

I use a 3/8" 0-80ftlbs Torque Wrench since the max torque I need is 80ftlbs for the lug nuts.

 

[skyfox23]

Whatever the range is, the torque wrench will be most accurate in the middle of it's range. So a 0-150 is mot accurate around 75-80lbs, perfect for lug nuts.

Might want to look into a smaller one with a shorter range for a lot of the other bolts with the approx 30lb torque specs. Lots of suspension parts fall in that range.

What's a good price range for a torque wrench, for lug nuts in that 80lb range?
Thanks

 

[WhiteWillie]

Thanks guys.

 

[MarkA]

Walmart and Autozone have a 1/2" drive, 150 ft-lb wrench for about $30. I don't know how accurate it is, but I'm not using it to make my living, so it should be good enough. It has a nice, long handle, so it's good for lug nuts. Buy a 6" straight extension to put on the socket so you aren't scaping your knuckles on the bodywork. They also have a smaller, 3/8" drive, 10-80 ft-lb one for about $25, which is good for brake calipers, etc.

The funny thing about the smaller one is that the handle is marked in "inch-pounds" , in 120 in-lb increments, (120-960), along the shaft, while the smaller graduations on the handle go in ft-lbs, from 0-9. So, to set it for, say 24 ft-lbs, you have to set it to 240 in-lbs on the shaft, then turn to the 4 on the handle. Apparently, the people who were putting graduations on the handle weren't in contact with the people who were putting the graduations on the shaft.

 

[skyfox23]

Walmart and Autozone have a 1/2" drive, 150 ft-lb wrench for about $30. I don't know how accurate it is, but I'm not using it to make my living, so it should be good enough. It has a nice, long handle, so it's good for lug nuts. Buy a 6" straight extension to put on the socket so you aren't scaping your knuckles on the bodywork. They also have a smaller, 3/8" drive, 10-80 ft-lb one for about $25, which is good for brake calipers, etc.

The funny thing about the smaller one is that the handle is marked in "inch-pounds" , in 120 in-lb increments, (120-960), along the shaft, while the smaller graduations on the handle go in ft-lbs, from 0-9. So, to set it for, say 24 ft-lbs, you have to set it to 240 in-lbs on the shaft, then turn to the 4 on the handle. Apparently, the people who were putting graduations on the handle weren't in contact with the people who were putting the graduations on the shaft.

I'm gonna need one by fall to remove my HFP's and put stock Si wheels back on for winter. Also gonna need to buy a nice floor jack too, makes it easier swapping wheels than using Civic jack.

 

[WhiteWillie]

I got a CDI 1/2 inch, 30-150 ft/lbs for Fathers' Day. Got it at Amazon for $125. This wrench will be passed on to my son at some point.

 

[MarkA]

Sometimes I wonder how accurate the cheap ones are, or how long they will remain accurate? If I continue to do this with any regularity, I suppose I will have to invest in a better one at some point, but, for now, I am happy to do what I can to help the starving Chinese rice farmers make the transition to a manufacturing economy.

 

[Pauly99to17]

Just bought this one from Canadian Tire. On sale for $60.
It has maximum setting of

• 3/8 inch, couple de 30 to 250 lb-inch (4,5-29,4 N )
  
  So, I have read that 80 lbs is the correct force to set it at for tightening lug nuts. Is this correct? The guy at Canadian Tire told me 100 lbs.
  
  
  http://www.canadiantire.ca/browse/p...2192120286&bmUID=1382192120286&bmLocale=fr_CA

 

[webby]

Just bought this one from Canadian Tire. On sale for $60.
It has maximum setting of

• 3/8 inch, couple de 30 to 250 lb-inch (4,5-29,4 N )
  
  So, I have read that 80 lbs is the correct force to set it at for tightening lug nuts. Is this correct? The guy at Canadian Tire told me 100 lbs.
  
  View attachment 28260
  http://www.canadiantire.ca/browse/product_detail.jsp?PRODUCT<>prd_id=845524443290632&FOLDER<>folder_id=1408474396672077&bmForm=form_locale_change&bmFormID=1382192120286&bmUID=1382192120286&bmLocale=fr_CA

Lugs are 80ft lb
This is a great resource-
http://www.collegehillshonda.com/instructions/civic/2012/4dr/civic_torque_specs.pdf

 

[Pauly99to17]

Lugs are 80ft lb
This is a great resource-
http://www.collegehillshonda.com/instructions/civic/2012/4dr/civic_torque_specs.pdf

Nice. How cool is that!?

 

[andre12dbsi]

Just bought this one from Canadian Tire. On sale for $60.
It has maximum setting of

• 3/8 inch, couple de 30 to 250 lb-inch (4,5-29,4 N )
  
  So, I have read that 80 lbs is the correct force to set it at for tightening lug nuts. Is this correct? The guy at Canadian Tire told me 100 lbs.
  
  View attachment 28260
  http://www.canadiantire.ca/browse/p...2192120286&bmUID=1382192120286&bmLocale=fr_CA

Pauly, that the same wrench that I have. It is 80lbs for our car.

 

[Pauly99to17]

Pauly, that the same wrench that I have. It is 80lbs for our car.

Nice deal I got on it eh?

 

[andre12dbsi]

For sure. They do that each every fall. I got mine a couple years ago for 50% off.

 

[Dar-Dar]

I bought a 1/2" drive 20-150 ft-lbs torque wrench several days ago. It was on sale for $11.99 at Harbor Freight.

 

[Pauly99to17]

I bought a 1/2" drive 20-150 ft-lbs torque wrench several days ago. It was on sale for $11.99 at Harbor Freight.

Now that is a great price.