2013 Si Rim Pitting
- Thread starter Shu
- Start date
- Thread starter
- #42
I have an update on the rims...
After bringing my car to the dealer for that grinding (throw-out bearing) sound when starting from stop, I also mentioned that the rims are pitting. Showed service manager and he said he would replace all of them under warranty...they also gave me a whole new cutch assembly (under W)...YAY Honda...now onto the oil consumption...
Bought a set of winters so there should be no salt issue anymore to pit them...never replaced my center caps though
Cheers,
Shu
After bringing my car to the dealer for that grinding (throw-out bearing) sound when starting from stop, I also mentioned that the rims are pitting. Showed service manager and he said he would replace all of them under warranty...they also gave me a whole new cutch assembly (under W)...YAY Honda...now onto the oil consumption...
Bought a set of winters so there should be no salt issue anymore to pit them...never replaced my center caps though
Cheers,
Shu
- Staff
- #43
- 52,105
- 22,314
That's phenomenal!
Nix
Jötunn Moderator
excellent update. good to hear Honda took care of you.
- Thread starter
- #46
It's a 2012 Si with just over 60K kms... but I started the oil consumption monitoring before warranty let out.
consumption of oil: 15% oil life, when I brake hard or take an on ramp at speed the oil light turns on and then off. I had to put in 3 quarts prior to getting oil changed which chaps my behind as they just drain all new oil a week later. So Honda is looking into it. I'll keep updating as I hear more.
Cheers,
Shu
consumption of oil: 15% oil life, when I brake hard or take an on ramp at speed the oil light turns on and then off. I had to put in 3 quarts prior to getting oil changed which chaps my behind as they just drain all new oil a week later. So Honda is looking into it. I'll keep updating as I hear more.
Cheers,
Shu