Skunk2 Dropsprings
- Thread starter FG4 Pjay
- Start date
Glockcoma
Well-Known Member
nope...as long as your talking stock tire size
Glockcoma
Well-Known Member
it will not rub at all
- Staff
- #4
- 52,105
- 22,314
Glockcoma
Well-Known Member
it will look good as hell though! that is a perfect drop in my opinion. it is no "hella flush" but its clean and practical.
Glockcoma
Well-Known Member
yoga pants should be illegal. i almost wreck my car daily looking at ladies wearing them.
- Staff
- #7
- 52,105
- 22,314
Glockcoma
Well-Known Member
his avatar....
- Staff
- #9
- 52,105
- 22,314
lol I had no idea where that comment came from
Michael Perez
Well-Known Member
Be sure to pick up some Godspeed rear camber arms 
Glockcoma
Well-Known Member
my drop was 1.75 and i had absolutly no need for rear camber adjustments. in fact my rear camber was still in spec. now at 10 k with perfect tire wear.
- Staff
- #12
- 52,105
- 22,314
pretty much everyone has said 2" and over...it will not be in spec. Numerous have posted their alignment spec sheets before/after.
Glockcoma
Well-Known Member
Michael Perez
Well-Known Member
The H&R springs had my rear camber all effed up and its only 1.4 in the rear. I wouldn't say it stays in spec everytime the time.
Glockcoma
Well-Known Member
thats odd...mine was fine after a toe adjustment. i wish i took a picture of the specs. i can next rotate when i check it.
Glockcoma
Well-Known Member
mine is 1.4 then aswell. H&R springs here too....mistype up there on drop, sometimes i have wishful thinking.
- Thread starter
- #17
Why would i need the camber kit?Be sure to pick up some Godspeed rear camber arms
- Thread starter
- #18
So will i be good with just the skunk2 drop springs?
- Staff
- #19
- 52,105
- 22,314
your car will be out of spec after dropping it 2+ inches. The camber kit will help you correct it. Otherwise, you'll end up with uneven tire wear.
- Thread starter
- #20
i can use these springs with my factory shock absorbers and experience no problems?