Arm0ged0n's 2012 Honda Civic Sedan Thread

Arm0ged0n

Arm0ged0n

Well-Known Member
1,574
1,484
Corona, CA
Vehicle Model
Honda Civic SI
Body Style
Sedan
New MSR 045 18 x8 with a 35mm Offset wheels along with Black Lions 225-40-18 performance tires:





 
Arm0ged0n

Arm0ged0n

Well-Known Member
1,574
1,484
Corona, CA
Vehicle Model
Honda Civic SI
Body Style
Sedan
Mikex18 said:
I like everything on your car... except that red intake..i rally dont like how its the only thing poping out from the engine bay
Buuuuuttt uts not my ride

Keep up the good work
Click to expand...

Thanks Mike, yeah the RBC manifold, throttle body are red, my oil cap, battery tie down, fender washers etc. I'm planning on dressing up the engine a little bit more.
 
Dar-Dar

Dar-Dar

Mordorator
19,329
9,900
North NJ
Vehicle Model
Civic Si
Body Style
Fiji Blue Pearl Coupe Coolest Member Since: May 15, 2011
Arm0ged0n said:
Stage 3 ported 8th gen manifold along with ported TB:

Click to expand...
Nice! The intake seems to fit well with the RBC installed. Are you going to paint the valve cover too? I've seen a red IM and a red Valve cover (K20) on an old civic before and it looked nice. Here's on on an Integra:


Also, why did you change wheels all of a sudden?
 
Arm0ged0n

Arm0ged0n

Well-Known Member
1,574
1,484
Corona, CA
Vehicle Model
Honda Civic SI
Body Style
Sedan
Dar-Dar said:
Nice! The intake seems to fit well with the RBC installed. Are you going to paint the valve cover too? I've seen a red IM and a red Valve cover (K20) on an old civic before and it looked nice. Here's on on an Integra:


Also, why did you change wheels all of a sudden?
Click to expand...
Not a bad idea, I would like to paint the valve cover as well (However I'm not sure how to or where to go to do this?) Yeah that integra looks sick. I changed wheels cause I wanted to go bigger from 17's to 18's and one of my crew members owns a tire shop; so he gave me a great deal for the wheels and tires :) Dar-Dar
 
Arm0ged0n

Arm0ged0n

Well-Known Member
1,574
1,484
Corona, CA
Vehicle Model
Honda Civic SI
Body Style
Sedan
Dar-Dar said:
You'll need to remove the wiper cowl and the cross member beneath it to remove the valve cover. Did you paint the IM yourself?
Click to expand...
No my friend painted the IM when he was done porting. I can ask if he can paint the valve cover too :)
 
Arm0ged0n

Arm0ged0n

Well-Known Member
1,574
1,484
Corona, CA
Vehicle Model
Honda Civic SI
Body Style
Sedan
Dar-Dar said:
Definitely! So it will be color matched, at least. I think it will look awesome. You should've ordered the wrinkle red Injen instead so it will match your color scheme. Lol.
Click to expand...
I know LOL but I was one of the first ones who got the intake so the wrinkle red wasn't an option back then LOL.
 
Arm0ged0n

Arm0ged0n

Well-Known Member
1,574
1,484
Corona, CA
Vehicle Model
Honda Civic SI
Body Style
Sedan
webby said:
looking good armo.... any feedback on differences since you've installed the rbc etc? New tune?
Click to expand...
Hey Webby I haven't re-tuned it yet as I'm sure the A/F ratio needs calibration. But let me tell you the difference is night and day, car has a lot of power and a lot of room for more petal. It definitely feels like you're driving a different car, you can hear the intake a lot more, and going uphill is not a problem at all. Overall, I'm very pleased with the swap!!! I will be adding a throttle body spacer next week.
 
What'sUpDOHC!

What'sUpDOHC!

Well-Known Member
590
401
Oahu,Hawaii
Vehicle Model
Si DOHC Beast
Body Style
4door
Sweet ride!! Hopefully I can pick up an RBc if my girl doesn't find out lol but well see;) would I need a tune if I got the RBc? I only have a dp and takeda intake.
 
You must log in or register to reply here.
Top